Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy

@article{Chen2012EffectOH,
  title={Effect of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy},
  author={Songyi Chen and Kanghua Chen and Guo-Sheng Peng and Le Jia and Peng-xuan Dong},
  journal={Materials \& Design},
  year={2012},
  volume={35},
  pages={93-98}
}
Abstract The influence of heat treatment on strength, exfoliation corrosion and electrochemical behavior of 7085 aluminum alloy has been investigated by tensile testing, exfoliation corrosion testing, polarization curve and electrochemical impedance spectroscopy (EIS) combined with transmission electron microscope (TEM). The results show that retrogression and reaging (RRA) improved exfoliation corrosion resistance without sacrificing the strength compared to T6 temper. Dual-retrogression and… Expand
Effect of Aging on corrosion Property , Electrochemical Behavior and Microstructure of 7075 Aluminum Alloy
The paper studied the effect of aluminum aging on corrosion behavior of 7075 alloy by adopting transmission electron microscope (TEM), electrochemistry, exfoliation corrosion test and intergranularExpand
Influence of aging treatments on the strength and localized corrosion resistance of aged Al–Zn–Mg–Cu alloy
Abstract The effect of multi-stage aging heat treatments on the hardness, tensile strength, electrical conductance, and exfoliation corrosion (EXCO) resistance of the Al–Zn–Mg–Cu alloy has beenExpand
Effects of re-solution and re-aging treatment on mechanical property, corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy
Abstract The effects of re-solution (RST) and re-aging (RA) treatment on the mechanical property, microstructure, corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy wereExpand
Effect of aging on corrosion property, electrochemical behavior and microstructure of AlZnMgCu alloy
The effect of aging treatment on corrosion behavior of AlZnMgCu alloy was investigated by means of intergranular corrosion test, exfoliation corrosion test, electrochemical analysis, and transmissionExpand
Influence of aging temperature on corrosion behavior of Al–Zn–Mg–Sc–Zr alloy
Abstract Al–Zn–Mg–Sc–Zr alloy sheets were prepared using water chilling copper mould ingot metallurgy processing which was protected by active flux. The effect of aging temperature on the corrosionExpand
The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy
Abstract The relationship among microstructures, mechanical properties and corrosion behaviors of spray formed 7055 aluminium alloy has been investigated upon peak-aging (T6), double-aging (DA) andExpand
Influence of grain structure on quench sensitivity relative to localized corrosion of high strength aluminum alloy
Abstract The influence of grain structure on quench sensitivity relative to localized corrosion of high strength aluminum alloy 7055 was investigated by electrochemical test, accelerated exfoliationExpand
Effect of cerium on microstructure, mechanical properties and corrosion properties of Al-Zn-Mg alloy
Abstract The effects of trace Ce on the microstructure, mechanical properties and corrosion resistance of Al-Zn-Mg alloy were studied by means of metallographic, scanning electron microscopy (SEM),Expand
Effect of heat treatment on stress corrosion cracking, fracture toughness and strength of 7085 aluminum alloy
Abstract The influences of heat treatment on stress corrosion cracking (SCC), fracture toughness and strength of 7085 aluminum alloy were investigated by slow strain rate testing, Kahn tear testingExpand
Corrosion Behavior Evolution of A7N01 Aluminum Alloys with Different Heat Treatments in the IGC Solution
Three different heat treatments, peak aging (T6), over-aging (T74) and retrogression and re-aging (RRA), were conducted for the A7N01 aluminum alloy respectively. The evolution of the corrosionExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 27 REFERENCES
Influence of retrogression and reaging treatments on the strength and stress corrosion resistance of aluminium alloy 7075-T6
Abstract The influence of retrogression and reaging (RRA) treatments on high strength aluminium alloy 7075 was studied using hardness and tensile testing and by measuring the stress corrosion crackExpand
Influence of retrogression and re-aging treatment on corrosion behaviour of an Al–Zn–Mg–Cu alloy
Abstract Influence of retrogression and re-aging treatment on the microstructure, strength, exfoliation corrosion, inter-granular corrosion and stress corrosion cracking of an Al–Zn–Mg–Cu alloy hasExpand
Effect of Cu Content on Corrosion Behavior of 7xxx Series Aluminum Alloys
The corrosion behavior of 7xxx aluminum alloys with various Cu content was investigated using polarization and electrochemical impedance spectroscopy (EIS) techniques. Two breakdown potentials wereExpand
Mechanism of localized corrosion of 7075 alloy plate
Investigation of localized corrosion in 7075 aluminum alloy plate shows that the mechanism of corrosion can be rationalized on the basis of potentiokinetic anodic polarization behavior. 7075 alloy inExpand
The effect of copper content and heat treatment on the hydrogen embrittlement of 7050-type alloys
Abstract The effect of copper content (0.01 and 2.1%) and microstructure on the intrinsic hydrogen embrittlement susceptibility of unl nercially-processed AI6Zn2MgXCu alloys was investigated. (TheExpand
Effect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution
Abstract Effect of heat treatments (namely T6, T73, RRA, OP1 and OP2) on the tensile strength (TS) and stress corrosion cracking (SCC) resistance of aluminum alloy 7050 in 3.5% NaCl solution at pH 12Expand
Retrogression and reaging and the role of dislocations in the stress corrosion of 7000-type aluminum alloys
The 7000-type aluminum alloys in the T6 temper are known to be highly susceptible to stress-corrosion cracking (SCC). Some years ago, a heat treatment known as retrogression and reaging (RR) wasExpand
Effect of pre-strain and two-step aging on microstructure and stress corrosion cracking of 7050 alloy
A novel heat treatment procedure that combines the pre-strain with a two-step aging was proposed to improve both the strength and stress corrosion cracking (SCC) resistance of the high strength 7050Expand
Retrogression and re-ageing of 7075 aluminium alloy : microstructural characterization
Abstract Industrial Summary: The 7075 aluminium alloy presents a low stress corrosion cracking strength when aged to achieve maximum mechanical strength, T6 temper; high stress corrosion crackingExpand
Influence of Heat Treatment and Scandium Addition on the Electrochemical Polarization Behavior of Al-Zn-Mg-Cu-Zr Alloy
In this study, the electrochemical polarization behaviors of Al-Zn-Mg-Cu-Zr (7010) alloy in three different heat treatments, namely, underaged, peak-aged, and overaged, were examined in 3.5 wt pctExpand
...
1
2
3
...