Effect of ball milling on graphene reinforced Al 6061 composite

@inproceedings{Bastwros2014EffectOB,
  title={Effect of ball milling on graphene reinforced Al 6061 composite},
  author={Mina Bastwros and Gap-Yong Kim and Can Zhu and Kun Qi Zhang and Shiren Wang and Xiaoduan Tang and Xinwei Wang},
  year={2014}
}
A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites… CONTINUE READING
Highly Cited
This paper has 22 citations. REVIEW CITATIONS

Citations

Publications citing this paper.
Showing 1-10 of 15 extracted citations

References

Publications referenced by this paper.
Showing 1-10 of 47 references

Influence of dry and wet ball milling on dispersion characteristics of the multi-walled carbon nanotubes in aqueous solution with and without surfactant

  • B Munkhbayar, MJ Nine, J Jeoun, M Bat-Erdene, H Chung, H. Jeong
  • Powder Technol 2013;234:132–40
  • 2013
Highly Influential
6 Excerpts

Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites

  • ZY Liu, SJ Xu, BL Xiao, P Xue, WG Wang, ZY. Ma
  • Compos A Appl Sci Manuf
  • 2012
Highly Influential
6 Excerpts

Effects of mechanical alloying on an Al6061–CNT composite fabricated by semi-solid powder processing

  • Y Wu, Kim G-Y, AM Russell
  • Mater Sci Eng A 2012;538:164–72
  • 2012
Highly Influential
8 Excerpts

Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing

  • Y Wu, Kim G-Y
  • J Mater Process Technol
  • 2011
Highly Influential
7 Excerpts

Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use

  • J Liao, Tan M-J
  • Powder Technol
  • 2011
Highly Influential
7 Excerpts

Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/ metal composites

  • L Wang, H Choi, J-M Myoung, W. Lee
  • 2009
Highly Influential
6 Excerpts

Milling and dispersion of multi-walled carbon nanotubes in texanol

  • N Darsono, D-H Yoon, J. Kim
  • Appl Surf Sci
  • 2008
Highly Influential
6 Excerpts

Reinforcement with carbon nanotubes in aluminum matrix composites

  • HJ Choi, GB Kwon, GY Lee, DH. Bae
  • Scripta Mater
  • 2008
Highly Influential
6 Excerpts

Dispersion of carbon nanotubes (CNTs) in aluminum powder

  • A Esawi, K. Morsi
  • Compos A Appl Sci Manuf
  • 2007
Highly Influential
10 Excerpts

Characterization of electrical and thermal properties of carbon nanotube/epoxy composites

  • F Gardea, DC Lagoudas
  • Compos Part B Eng 2014;56:611–20
  • 2014
1 Excerpt

Similar Papers

Loading similar papers…