Effect of Thermoplastic Starch and Photocrosslinking on the Properties and Morphology of Electrospun Poly(ethylene‐ co ‐vinyl alcohol) Mats

@article{Mondragn2019EffectOT,
  title={Effect of Thermoplastic Starch and Photocrosslinking on the Properties and Morphology of Electrospun Poly(ethylene‐
 co
 ‐vinyl alcohol) Mats},
  author={Margarita Mondrag{\'o}n and Oliver L{\'o}pez-Villegas and Sa{\'u}l S{\'a}nchez-Valdes and Francisco Javier Rodr{\'i}guez‐Gonz{\'a}lez},
  journal={Polymer Engineering and Science},
  year={2019},
  volume={60},
  pages={474-480}
}
Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes
The effects of strain rate, size (height × width), and pre-existing crack length on the mechanical response of polycaprolactone electrospun membranes were investigated by tension tests conducted at
Effect of membrane parameters and filter structure on the efficiency of leukocyte removal by electrospun poly(ethylene-co-vinyl alcohol) membranes
TLDR
It is concluded that despite the suitability of electrospinning for fabrication of leukodepletion filter media, the use of nano-dimension fibers is not preferred for leukocyte adhesion filter when the material of choice is such a polymer with ideal surface chemistry, wettability and inherent ability forLeukocyte binding.

References

SHOWING 1-10 OF 42 REFERENCES
Preparation and characterization of modified starch‐based plastic film reinforced with short pulp fiber. II. Mechanical properties
Native corn starch- and hydroxypropylated starch (HPS-) based plastic films were prepared using the short pulp fiber as the reinforcement and the glycerol as the plasticizer. The results of tensile
Thermal, mechanical, and gas barrier properties of ethylene–vinyl alcohol copolymer‐based nanocomposites for food packaging films: Effects of nanoclay loading
For the application of single-layer food packaging films with improved barrier properties, an attempt was made to prepare ethylene-vinyl alcohol (EVOH) copolymer-based nanocomposite films by
Air permeability of electrospun polyacrylonitrile nanoweb
Ultrafine fibers were spun from polyacrylonitrile (PAN) solution in N,N-dimethylformamide using a homemade electrospinning setup. Fibers with diameter ranging from 80 to 340 nm were obtained. Fiber
Structural characteristics of biodegradable thermoplastic starch/poly(ethylene–vinyl alcohol) blends
To establish relationships among the blend composition, processing history, and the resultant properties of starch-based thermoplastics, three varieties of corn starch: (1) Waxy Maize, (2) Native
Solid-state photo-cross-linking of cassava starch: improvement properties of thermoplastic starch
AbstractPhoto-cross-linked thermoplastic cassava starch was prepared using 3% of sodium benzoate. Sodium benzoate was used as photo-initiator which induced cross-linking formation. The thermoplastic
...
...