• Corpus ID: 111019884

ELECTRODES INSTALLED IN ROLL-ON SUSPENSION SLEEVES

@inproceedings{Daly2002ELECTRODESII,
  title={ELECTRODES INSTALLED IN ROLL-ON SUSPENSION SLEEVES},
  author={Wayne K. Daly},
  year={2002}
}
This presentation describes transhumeral and transradial prostheses which have been successfully fit to patients using electrodes installed in roll-on suspension sleeves. Metal electrodes and modified wiring systems have been developed and tested along with techniques for installing electrodes in roll-on sleeves to provide improved suspension and electrode contact. This series of patients has shown that a Roll-on sleeve is an excellent way to achieve superior suspension and greater range of… 

Tables from this paper

AN ELECTROMECHANICAL QUICK-CONNECT MECHANISM FOR MYOELECTRIC PROSTHESES USING SILICONE SLEEVES
TLDR
An electromechanical quick-connect attachment is developed that enables the user to easily connect/disconnect the prosthetic shell and hand system to/from the liner, yet still provides for the mechanical suspension/connection between liner and prosthesis.
Test Rig Design and Preliminarily Assessment for a Transradial Socket
TLDR
This experimental work covers two main tests for assessment the transradial socket at different positions and planes that can predict when dislocation between the socket and residual limb will happen at any weight and plane.
Enhancing the versatility of wireless biopotential acquisition for myoelectric prosthetic control
TLDR
This work describes the fabrication and performance of a fully wireless and batteryless EMG recording system and use of this system to direct virtual and electric-powered limbs in real-time and demonstrates the advantage of using MRC to optimize power transfer to a network of wireless devices.
Prosthetic sockets stabilized by alternating areas of tissue compression and release.
TLDR
Three socket designs are introduced: transradial, transfemoral, and transhumeral, which aim to reduce lost motion when the bone is moved with respect to the socket.
Design of a myoelectric 3D-printed prosthesis for a child with upper limb congenital amputation
TLDR
The proposed prosthesis implements two important features: the use of sound biofeedback and a soft socket with in-liner electrodes that will make the hand prosthesis easy to use, lightweight and affordable, improving the control performance and increasing the acceptance rate.

References

SHOWING 1-4 OF 4 REFERENCES
Distributed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 United States License by UNB and the Institute of
  • Biomedical Engineering
MEC '02 The Next Generation
  • Proceedings of the 2002 MyoElectric Controls/Powered Prosthetics Symposium
  • 2002