• Corpus ID: 9523101

EE 541 , Fall 2006 : Course Notes # 2 Scattering Parameters : Concept , Theory , and Applications

@inproceedings{Choma2006EE5,
  title={EE 541 , Fall 2006 : Course Notes \# 2 Scattering Parameters : Concept , Theory , and Applications},
  author={Dr. John Choma},
  year={2006}
}

• D. Choma
• Published 2006
• Engineering

This report introduces the scattering parameter concept from two perspectives. First, the scattering parameters are shown to be an effective vehicle for characterizing the high frequency I/O characteristics of two port networks. Such measurement effectiveness derives from the fact that scattering parameter measurements obviate problems invariably incurred at very high frequencies by the actions of either short-circuiting or open circuiting network ports. The second perspective is the utility of scattering analyses in the design of lossless two port filters, which are fundamental to modern communication systems. Original: November 2002 Course Notes #2 University of Southern California J. Choma 1.0. INTRODUCTION The short circuit admittance, open circuit impedance, hybrid h–, and hybrid g– parameters are commonly used to formulate two port circuit models that macroscopically interrelate the driving point input and output impedance and forward and reverse transfer characteristics of relatively complex linear networks. These models are simple architectures in that they embody only four electrical parameters whose measurement or calculation exploit the electrical implications of short or open circuits imposed at the input and output ports of the network undergoing study. Although the parameterization of these conventional two port models can generally be executed straightforwardly and accurately at relatively low signal frequencies, high signal processing frequencies present at least two challenges in broadband electronics. The first of these challenges is that the unavoidable parasitic inductance implicit to circuit interconnects renders perfect short circuits an impossibility at very high signal frequencies. Moreover, very low impedance paths at either the input or the output port of electronic circuits may force embedded active devices to function nonlinearly or even to fail because of excessive current conduction. Second, the inherent potential instability of most high frequency or broadband electronic networks is exacerbated when these networks are constrained to operate with open circuited input or output ports. For example, attempts to measure the open circuit impedance parameters of a broadband electronic circuit are invariably thwarted by parasitic network oscillations incurred by the action of opening either an input or an output network port. The daunting, if not impossible, challenge posed by the measurement of conventional two port parameters motivates the scattering, or S–parameter characterization of linear two port systems. In contrast to the impedance, admittance, and hybrid parameters, the scattering parameters of linear electrical or electronic networks are measured without need of short-circuiting or open circuiting input and output ports. Instead, these ports are terminated in fixed and known characteristic impedances that are often similar or even identical to the terminating impedances incorporated in the design. Accordingly, the dynamic performance and operational integrity of a network under test are not compromised by test fixturing adopted for its scattering parameter characterization. Neither is the comfort level most engineers have with conventional two port parameters compromised, for measured scattering parameters can always be converted to corresponding admittance, impedance, and hybrid parameters. While such conversion practices are ubiquitous, they are actually unnecessary since the driving point and transfer properties of linear passive or active two port configurations can be determined directly in terms of the measured or computed network S–parameters. The preceding paragraph implies that S–parameters are a measurement-friendly alternative to conventional two port network parameters. Indeed, scattering parameters are conveniently extracted in the laboratory, but they are also explicitly useful in design. Because the S– parameters of a linear two port network interrelate incident and reflected waves of energy at input and output ports, as opposed to intertwining input and output port voltages and currents, they are useful in the design of microwave amplifiers. The reason underlying this design utility is that voltages and currents are more difficult to quantify uniquely at microwave frequencies than are delivered energies and average signal power levels. Additionally, the scattering parameters of lossless two ports have a unique property that enables their judicious exploitation in the design of lossless matching networks serving to achieve maximum signal power transfer from a source to its load. August 2006 68 Scattering Parameters Course Notes #2 University of Southern California J. Choma This report develops the scattering parameter concept and defines the S–parameters of a generalized linear two port network. Following a demonstration of the strategy used to convert S–parameters to conventional two port parameters, it addresses the utility of S–parameters in the analysis of active networks. Finally, the report explores the application of S–parameters in the design of lossless matching filters for RF circuit applications. 2.0. REFLECTION COEFFICIENT The scattering parameter concept for two port network analyses is best introduced by first considering the scattering characterization of the simple one port network consisting of the load impedance, Zl, shown in Figure (1). The load impedance at hand consists of a real part, say Rl, and an imaginary component, Xl, which is positive for an inductive termination and negative for a capacitive load. The subject figure portrays a voltage source, Vs, whose Thévenin equivalent impedance is the real resistance, Ro. In the scattering theory vernacular, this Thévenin impedance is often referred to as the reference impedance of the one port network.