Dynamic modeling and experimental analysis of PEMFCs: A comparative study

@article{Saadi2016DynamicMA,
  title={Dynamic modeling and experimental analysis of PEMFCs: A comparative study},
  author={A. Saadi and Mohamed Becherif and Daniel Hissel and Haitham Saad Mohamed Ramadan},
  journal={International Journal of Hydrogen Energy},
  year={2016},
  volume={42},
  pages={1544-1557}
}
Abstract Different Fuel Cell (FC) stacks or system models must be developed relevance to a specified main objective, either an accurate electro-chemical behavior description or optimization procedure at a system level. In this paper, the characteristics of cell polarization V–I curves are studied for three different dynamic models (Dicks, impedance and electrical equivalent circuit). The simulation results, using MATLAB-Simulink™, provide an adequate evaluation of each model under different… Expand
An Enhanced Fuel Cell Dynamic Model With Electrochemical Phenomena Parameterization as Test Bed for Control System Analysis
In this work, a model of a proton exchange membrane fuel cell (PEMFC) is presented. A dynamic performance characterization is performed to assess the cell transient response to input variables. TheExpand
New Equivalent Electrical Model of a Fuel Cell and Comparative Study of Several Existing Models with Experimental Data from the PEMFC Nexa 1200 W
TLDR
The present work investigates different models of polymer electrolyte membrane fuel cell, studying a nonlinear state-space model, a generic dynamic model integrated into MATLAB/Simulink, and an equivalent RC electrical circuit with major advantages and drawbacks. Expand
Analysis of electrochemical and thermal models and modeling techniques for polymer electrolyte membrane fuel cells
Abstract Polymeric Electrolyte Membrane Fuel Cell (PEMFC) modeling considering thermal and electrical behavior in a coupled manner is a key aspect when evaluating new designs, materials, physicalExpand
A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems
Abstract An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H2 consumptions corresponding to generated powerExpand
Development of a PEMFC dynamic model and the application to the analysis of fuel cell vehicle performance
In order to investigate basic output performances of PEMFC (Proton Exchange Membrane Fuel Cell) stack, a dynamic model of PEMFC stack has been developed by combining electrochemical sub-model andExpand
On-line Water Contents Diagnosis of PEMFC Based on Measurements
The polymer electrolyte membrane fuel cell has been widely studied in many fields and is being commercialized through various applications such as automobiles or distributed power generation.Expand
Investigation of FCVs durability under driving cycles using a model-based approach
Abstract The stack degradation of a fuel cell system is a critical factor in ensuring the stack performance and reliability of a fuel cell vehicle (FCV). In particular, the stack degradation dependsExpand
A vehicular proton exchange membrane fuel cell system co-simulation modeling method based on the stack internal distribution parameters monitoring
TLDR
An innovative modeling method, Simulink and Fluent co-simulation method, is used to establish a fuel cell system-level model that can obtain not only response characteristics of auxiliary subsystems and the system dynamic performance, but also the internal physical quantities distribution changes. Expand
Modeling and Control Strategies of Proton Exchange Membrane Fuel Cells
In this work, comprehensive mathematical models for polymer electrolyte fuel cells (PEFCs) with three different controllers (PID, FOPID and fuzzy + PID) are developed. The models are designed toExpand
Model based control strategies to control voltage of Proton Exchange Membrane Fuel Cell
Abstract The present work deals with the evaluation of model based control strategies for a PEM fuel cell to control voltage. PEM fuel cell is an electrochemical device that converts the chemicalExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 42 REFERENCES
Multiphysics simulation of a PEM electrolyser: Energetic Macroscopic Representation approach
Abstract In this paper, a graphical model of Proton Exchange Membrane (PEM) electrolyser is presented. The modelling is performed with respect to a generic approach then it is tuned regarding theExpand
Parameter analysis of PEM fuel cell hysteresis effects for transient load use
This paper focuses on the hysteresis effect of the polarization characteristics of a polymer electrolyte membrane fuel cell (PEMFC), mainly due to the compressor-air supply system dynamics. Indeed inExpand
PEM fuel cell model suitable for energy optimization purposes
Abstract Many fuel cell stack models or fuel cell system models exist. A model must be built with a main objective, sometimes for accurate electro-chemical behavior description, sometimes forExpand
Modeling and Fault Diagnosis of a Polymer Electrolyte Fuel Cell Using Electrical Equivalent Analysis
Fuel cell systems are complex systems and a high degree of competence is needed in different areas of knowledge such as thermodynamics, fluid dynamics, electrochemistry, and others, for theirExpand
Electronic modeling of a PEMFC with logarithmic amplifiers
Abstract The main purpose of this project has been to simulate the behavior of a PEM-type fuel cell working in a stationary regimen using an equivalent circuit (EC). The EC designed with MultisimExpand
Dynamic Characteristics of PEM Fuel Cells
Fuel cell applications have become increasingly attractive. Therefore, comprehensive models, simulation and analysis tools are required to characterize fuel cell behavior. For years, the focus hasExpand
Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current
In this paper an impedance model of the proton exchange membrane fuel cell stack (PEMFCS) is proposed. The proposed study employs an equivalent circuit of the PEMFCS derived by frequency responseExpand
A simple dynamic model for polymer electrolyte membrane fuel cell (PEMFC) power modules: Parameter estimation and model prediction
Abstract A simple dynamic model was proposed to describe the transient output characteristics of polymer electrolyte membrane fuel cells (PEMFCs). Physical parameters for the proposed model wereExpand
Test Method and Equivalent Circuit Modeling of a PEM Fuel Cell in a Passive State
A novel test protocol is proposed for fuel cells that are in a nonfunctioning or passive state. Standard fuel-cell test methods are reviewed, along with the equivalent circuit models (ECMs) used toExpand
Dynamic modeling of proton exchange membrane fuel cell using non-integer derivatives
The modeling of proton exchange membrane fuel cells (PEMFC) may work as a powerful tool in the development and widespread testing of alternative energy sources in the next decade. In order to obtainExpand
...
1
2
3
4
5
...