Drilling and structural property study of multi-layered fiber and fabric reinforced polymer composite - a review

@article{Rao2019DrillingAS,
  title={Drilling and structural property study of multi-layered fiber and fabric reinforced polymer composite - a review},
  author={Yermal Shriraj Rao and Nanjangud Mohan and Nagaraj Shetty and Basavannadevaru Shivamurthy},
  journal={Materials and Manufacturing Processes},
  year={2019},
  volume={34},
  pages={1549 - 1579}
}
ABSTRACT Fiber-reinforced polymer (FRP) composites are widely being used for structural applications due to their attractive properties. Particularly, to fabricate complicated structures by FRP composites, joining composite structure elements through fasteners require drilled holes. More than 60% of the structural FRP components are rejected owing to poor quality of holes. The FRP composites are heterogeneous due to multi-layer architecture, multi-phase material combinations, and hybridization… Expand
Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills
ABSTRACT Drilling of high-strength carbon/epoxy composites has been a critical procedure in the industry due to the need to create holes for mechanical assemblies. However, the inherent anisotropyExpand
Experimental investigation and optimization of abrasive waterjet machining parameters for GFRP composites using metaphor-less algorithms
ABSTRACT Hole making is an important phase in composite machining as structural applications of composites require assemblage. To do so, abrasive waterjet machining (AWM) is recommended by severalExpand
Effects of solid lubricant fillers on the flexural and shear strength response of carbon fabric-epoxy composites
Abstract Multi-layered carbon fabric-epoxy composites (CFEC) encounter certain challenges in expanding their usage mainly due to their low interlaminar shear strength (ILSS) and sensitivity toExpand
A Novel Finite Element Method Approach in the Modelling of Edge Trimming of CFRP Laminates
Nowadays, the development of robust finite element models is vital to research cost-effectively the optimal cutting parameters of a composite machining process. However, various factors, such as theExpand
Dual filler functionally graded polymermaterials – manufacturing process and characteristics
ABSTRACT Functionally graded material (FGM) are a composite material which consists of filler material and matrix. FGM properties vary along the composition gradient. Common FGMs employs one type ofExpand
Furfuryl resin/CNT/carbon fiber drilling, using carbide drill coated with Balinit-Helica
ABSTRACT Bolted joints are the most common form of union of the components in an airplane, with drilling being the most used process in obtaining the holes. However, this process can cause severalExpand
3D-MID Technology for Surface Modification of Polymer-Based Composites: A Comprehensive Review
TLDR
The findings presented here allow to fundamentally understand the concept of 3D-MID, which can be used to manufacture a novel polymer composite substrate, and the main surface modification techniques used to enhance the polymer substrate. Expand
Development and Multiscale Characterization of 3D Warp Interlock Flax Fabrics with Different Woven Architectures for Composite Applications
Multiscale characterization of the textile preform made of natural fibers is an indispensable way to understand and assess the mechanical properties and behavior of composite. In this study, aExpand
Tool Wear and Surface Evaluation in Drilling Fly Ash Geopolymer Using HSS, HSS-Co, and HSS-TiN Cutting Tools
TLDR
It was found that, based on the range of parameters set in this experiment, the spindle speed is directly proportional to the tool wear and inversely proportional to surface roughness and therefore, ranges of cutting tools and parameters suggested can be a guideline for researchers and manufacturers to drill geopolymer for further applications. Expand
A systematic material-oriented design approach for lightweight components and the CFRP motor wheel case study
TLDR
The Systematic Design Approach has been extended to include potentialities and constraints related to materials and manufacturing at the early steps of the design flow and is applied to design the carbon fiber-reinforced polymer motor wheel of the Emilia 4 solar vehicle. Expand
...
1
2
...

References

SHOWING 1-10 OF 216 REFERENCES
Drilling on fiber reinforced polymer/nanopolymer composite laminates: a review
Abstract Among various machining operations, drilling is the most commonly employed machining operation for polymer composite laminates owing to the need for joining structures. Work with commercialExpand
Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials
Abstract Machining processes are generally used to cut; drill, or contour composite laminates for building products. In fact, drilling is one of the most commonly used manufacturing processes toExpand
Delamination in drilling GFR-thermoset composites
Abstract Delamination is a major problem associated with drilling fiber-reinforced composite materials that, in addition to reducing the structural integrity of the material, also results in poorExpand
Experimental analysis of special tool geometries when drilling woven and multidirectional CFRPs
Drilling is one of the most frequent machining operations for carbon fiber-reinforced polymer composites, carried out prior to assembly between structural components using mechanical joining.Expand
Investigation of delamination and surface quality of machined holes in drilling of multiwalled carbon nanotube doped epoxy/carbon fiber reinforced polymer nanocomposite
In the drilling of carbon fiber reinforced polymer composite materials, drilling-induced delamination and surface roughness of machined holes are causes of major concern, particularly, whenExpand
Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites
Composites use in the aerospace industry is expanding, in particular carbon fibre reinforced plastics (CFRP) for structural components. Machinability can however be problematic especially whenExpand
Delamination and Surface Roughness Analyses in Drilling Hybrid Carbon/Glass Composite
Previous attempts at drilling of fibrous composites have been challenging due to the limited mechanical properties and presence of severe delamination damage at the top and bottom surfaces of theExpand
Analyses of forces and hole quality in micro-drilling of carbon fabric laminate composites
Aerospace, automobile and medical industries extensively use carbon fabric laminate due to their superior physical and chemical characteristics and, from performance point of view, micro-features areExpand
Experimental analysis of drilling fiber reinforced composites
In comparison with metals, long-fiber reinforced composites have a layered structure, with different properties throughout their thickness. When drilling such structures, internal defects likeExpand
Drilling thick fabric woven CFRP laminates with double point angle drills
a b s t r a c t Carbon fiber reinforced plastics (CFRPs) have many desirable properties, including high strength-to- weight ratio, high stiffness-to-weight ratio, high corrosion resistance, and lowExpand
...
1
2
3
4
5
...