Dislocation drag from phonon wind in an isotropic crystal at large velocities

@article{Blaschke2019DislocationDF,
  title={Dislocation drag from phonon wind in an isotropic crystal at large velocities},
  author={Daniel N Blaschke and Emil Mottola and Dean Laverne Preston},
  journal={Philosophical Magazine},
  year={2019},
  volume={100},
  pages={571 - 600}
}
ABSTRACT The anharmonic interaction and scattering of phonons by a moving dislocation, the photon wind, imparts a drag force on the dislocation. In early studies, the drag coefficient B was computed and experimentally determined only for dislocation velocities v much less than transverse sound speed, . In this paper, we derive analytic expressions for the velocity dependence of B up to in terms of the third-order continuum elastic constants of an isotropic crystal, in the continuum Debye… 
Common misconceptions about 'transonic' screw dislocations
A number of recent Molecular Dynamics (MD) simulations have demonstrated that screw dislocations in face centered cubic (fcc) metals can achieve stable steady state motion above the lowest shear wave
Plasticity Autowave Characteristics of Metals and the Periodic Table of Elements
In this paper, the general laws of localized plastic flow development are described for the linear work hardening stages of nineteen metals. The correlations are established and discussed between
Experimental evaluation of shear modulus scaling of dynamic strength at extreme pressures
Recent progress in the development of dynamic strength experimental platforms is allowing for unprecedented insight into the assumptions used to construct constitutive models operating in extreme
Temperature Dependence of Autowave Characteristics of Localized Plasticity
Abstract The behavior of localized plastic flow autowaves in a Fe–Ni–Cr alloy at temperatures 143 K ≤ T ≤ 420 K is considered. The temperature variation of the autowave propagation velocity is
A physically based constitutive model of microstructural evolution of Ti6Al4V hard machining under different lubri-cooling conditions
The metallurgical phenomena taking place during machining processes affect the thermo-mechanical properties of the severely deformed materials, influencing, consequently, the process behavior. The
Model of Plastic Deformation and Failure of Solids
A model of localized plastic flow development based on the idea about interaction between plasticity carriers and acoustic emission pulses generated by developing elementary plasticity acts is
A general solution for accelerating screw dislocations in arbitrary slip systems with reflection symmetry
  • D. Blaschke
  • Physics, Materials Science
    Journal of the Mechanics and Physics of Solids
  • 2021
...
1
2
...

References

SHOWING 1-10 OF 99 REFERENCES
Velocity dependent dislocation drag from phonon wind and crystal geometry
  • D. Blaschke
  • Physics, Materials Science
    Journal of Physics and Chemistry of Solids
  • 2019
Abstract The mobility of dislocations is an important factor in understanding material strength. Dislocations experience a drag due to their interaction with the crystal structure, the dominating
Properties of Dislocation Drag from Phonon Wind at Ambient Conditions
TLDR
The approximate functional dependence of dislocation drag B on dislocation velocity in various regimes between a few percent of transverse sound speed cT and cT (where cT is the effective average transverseSound speed of the polycrystal) is discussed.
Anharmonicity Contributions to Dislocation Drag
A unified theory of the effect of phonon‐phonon scattering on the drag force Bv acting upon a dislocation moving with velocity v, much less than the sound velocity, is presented. A formalism is
Theory of Dislocation Mobility in Pure Slip
The mobility during glide of uniformly moving dislocations or dislocation segments supposed not to be obstructed by any Peierls' barrier is estimated. For a straight freely moving dislocation, the
Line tension of a dislocation moving through an anisotropic crystal
ABSTRACT Plastic deformation, at all strain rates, is accommodated by the collective motion of crystalline defects known as dislocations. Here, we extend an analysis for the energetic stability of a
Uniformly Moving Dislocations
An expression is derived for the displacements in an isotropic elastic medium which contains an edge dislocation moving with uniform velocity c. When c=0 the solution reduces to that given by Burgers
Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys
Dislocation velocities and mobilities are studied using molecular dynamics simulations for edge and screw dislocations in pure aluminium and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg
HIGH VELOCITY DISLOCATIONS
Abstract : The elastic displacement field of moving edge dislocations in anisotropic body-centered-cubic and face-centered-cubic crystals is found. From the elastic displacements the shear stress on
Elastic precursor wave decay in shock-compressed aluminum over a wide range of temperature
The effect of temperature on the dynamic flow behavior of aluminum is considered in the context of precursor wave decay measurements and simulations. In this regard, a dislocation-based model of
Mobility of Dislocations in Aluminum *
The velocities of individual dislocations of edge and mixed types in pure aluminum single crystals were determined as a function of applied-resolved shear stress and temperature. The dislocation
...
1
2
3
4
5
...