Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: A review

@article{Gevari2020DirectAI,
  title={Direct and indirect thermal applications of hydrodynamic and acoustic cavitation: A review},
  author={Moein Talebian Gevari and Taher Abbasiasl and Soroush Niazi and Morteza Ghorbani and Ali Koşar},
  journal={Applied Thermal Engineering},
  year={2020},
  volume={171},
  pages={115065}
}

The Hydrodynamic Cavitation Manifestation in Small Chips

Cavitation is a phase change phenomenon generated by the static pressure reduction of a liquid medium at a constant temperature. This process has been considered as a disadvantageous mechanism in

The Hydrodynamic Cavitation Manifestation in Small Chips 2

Cavitation is a phase change phenomenon created by the static pressure reduction of a liquid medium at 13 a constant temperature. This process has been considered as a disadvantageous mechanism in

Thermodynamic effects on single cavitation bubble dynamics under various ambient temperature conditions

Thermodynamic characteristics and their effects on single cavitation bubble dynamics are important to elucidate the physical behaviors of cavitation phenomena. In this study, experimental and

Influence of Fluid Properties on Intensity of Hydrodynamic Cavitation and Deactivation of Salmonella typhimurium

In this study, three microfluidic devices with different geometries are fabricated on silicon and are bonded to glass to withstand high-pressure fluid flows in order to observe bacteria deactivation

Prediction of the Impact of Nozzle Geometry on Spray Characteristics

It has been found that the occurrence of cavitation depends on the amount of energy needed to overcome the viscosity and friction between the liquid layers, and the mass flowing through the nozzle decreases with increasing cavitation.

Using CFD simulations to investigate the shear stress in hydrodynamic cavitation reactors coupled with experimental validation using colony count measurements

The current work investigates the shear stress distribution in hydrodynamic cavitation reactors with two different geometries using CFD simulations. Venturi type (positive geometry) and bore

Validation of a three-phase Eulerian CFD model to account for cavitation and spray atomization phenomena

Cavitation phase change phenomenon appears in many engineering applications, often eroding and damaging surfaces, so deteriorating the performance of devices. Therefore, it is a phenomenon of great

References

SHOWING 1-10 OF 171 REFERENCES

Experimental Study on the Heat Transfer Enhancement of Oscillating-Flow Heat Pipe by Acoustic Cavitation

Experimental investigations on the heat transfer characteristics of an oscillating-flow heat pipe with acoustic cavitation in comparison with the ordinary oscillating-flow heat pipe are given in this

Energy harvesting with micro scale hydrodynamic cavitation-thermoelectric generation coupling

In this study, energy harvesting with micro scale hydrodynamic cavitation-thermoelectric generation coupling is investigated. For this, three micro orifices with different geometrical dimensions are

Effect of cavitating flow on forced convective heat transfer: a modeling study

With water as working medium, a numerical study on liquid convection heat transfer accompanied by cavitating flow in a circular tube was conducted by combining mixture model and Schnerr–Sauer

Hydrodynamic Cavitation and Boiling in Refrigerant (R-123) Flow Inside Microchannels

This report investigates the effect that hydrodynamic cavitation has on heat transfer. The fluid medium is refrigerant R-123 flowing through 227 μm hydraulic diameter microchannels. The cavitation is

Cavitation Bubble Collapse Near a Heated Wall and Its Effect on the Heat Transfer

In the present work, a numerical investigation on the mechanism of heat transfer enhancement by a cavitation bubble collapsing near a heated wall has been presented. The Navier-Stokes equations and
...