Corpus ID: 221340949

Direct Imaging and Electronic Structure Modulation of Double Moir\'e Superlattices at the 2D/3D Interface

@article{Reidy2020DirectIA,
  title={Direct Imaging and Electronic Structure Modulation of Double Moir\'e Superlattices at the 2D/3D Interface},
  author={Kate Reidy and G. Varnavides and J. D. Thomsen and Abinash Kumar and Thang Toan Pham and A. Blackburn and P. Anikeeva and Prineha Narang and J. Lebeau and F. Ross},
  journal={arXiv: Materials Science},
  year={2020}
}
The atomic structure at the interface between a two-dimensional (2D) and a three-dimensional (3D) material influences properties such as contact resistance, photo-response, and high-frequency performance. Moire engineering has yet to be explored for tailoring this 2D/3D interface, despite its success in enabling correlated physics at 2D/2D twisted van der Waals interfaces. Using epitaxially aligned MoS$_2$ /Au{111} as a model system, we apply a geometric convolution technique and four… Expand

Figures from this paper

References

SHOWING 1-10 OF 40 REFERENCES
In situ nanoscale imaging of moiré superlattices in twisted van der Waals heterostructures
TLDR
The authors demonstrate that the moiré pattern in twisted bilayer graphene can be indirectly imaged by imaging the phonon polariton interference on the top hexagonal boron nitride encapsulation layer. Expand
Visualization of moiré superlattices
TLDR
A simple, room-temperature, ambient method to visualize real-space moiré superlattices with sub-5-nm spatial resolution in a variety of twisted van der Waals heterostructures including, but not limited to, conducting graphene, insulating boron nitride and semiconducting transition metal dichalcogenides is described. Expand
Direct observation of epitaxial alignment of Au on MoS2 at atomic resolution
The morphology and structural stability of metal/2D semiconductor interfaces strongly affect the performance of 2D electronic devices and synergistic catalysis. However, the structural evolution atExpand
Moiré engineering of electronic phenomena in correlated oxides
Moiré engineering has recently emerged as an effective approach to control quantum phenomena in condensed matter systems 1 – 6 . In van der Waals heterostructures, moiré patterns can be formed byExpand
Convergent beam electron holography for analysis of van der Waals heterostructures
TLDR
Convergent beam electron holographic technique is presented which allows imaging of the stacking order in van der Waals heterostructures and allows one to reconstruct the relative rotation, stretching, and out-of-plane corrugation of the layers with atomic precision. Expand
Atomic and electronic reconstruction at the van der Waals interface in twisted bilayer graphene
TLDR
An investigation of the structural and transport properties of bilayer graphene as a function of the twist angle between the layers reveals atomic-scale reconstruction for twist angles smaller than a critical value. Expand
Moiré pattern in LEED obtained by van der Waals epitaxy of lattice mismatched WS2/MoTe2(0001) heterointerfaces
Abstract Thin films of WS 2 have been grown by van der Waals epitaxy (vdWE) on the basal planes of 2H-MoTe 2 (0001). Despite a lateral mismatch of 10.3%, epitaxial growth is achieved by metal organicExpand
Gate-Tunable Semiconductor Heterojunctions from 2D/3D van der Waals Interfaces.
TLDR
2D/3D heterojunctions using MoS2 as the prototypical 2D semiconductor laid upon Si and GaN as the 3D semiconductors layers are demonstrated and it is suggested that the interface quality does not necessarily affect Fermi-level tuning at the junction opening up possibilities for novel 2D/ 3D heter Mojunction device architectures. Expand
Simultaneous Identification of Low and High Atomic Number Atoms in Monolayer 2D Materials Using 4D Scanning Transmission Electron Microscopy.
TLDR
Using 4D-STEM, surface adatoms on MoS2 monolayers are identified and atomic columns with similar total atomic number are separated into their relative combinations of low and high atomic number elements. Expand
Atomic reconstruction in twisted bilayers of transition metal dichalcogenides
TLDR
Atomic-resolution transmission electron microscopy is used to reveal the lattice reconstruction in twisted bilayers of the transition metal dichalcogenides, MoS 2 and WS 2, showing that such reconstruction creates strong piezoelectric textures, opening a new avenue for engineering of 2D material properties. Expand
...
1
2
3
4
...