Dimensional Stability and Dynamic Young’s Modulus of Tropical Light Hardwood Chemically Treated with Methyl Methacrylate in Combination with Hexamethylene Diisocyanate Cross-Linker
@article{Islam2011DimensionalSA, title={Dimensional Stability and Dynamic Young’s Modulus of Tropical Light Hardwood Chemically Treated with Methyl Methacrylate in Combination with Hexamethylene Diisocyanate Cross-Linker}, author={Md. Saiful Islam and Sinin Bin Hamdan and Ismail Jusoh and Md. Rezaur Rahman and Zainal Abidin Talib}, journal={Industrial \& Engineering Chemistry Research}, year={2011}, volume={50}, pages={3900-3906} }
Chemical treatment is often used to improve the physical and mechanical properties of wood materials. In this study, wood polymer composites (WPC) were prepared from five types of tropical wood species by impregnating the woods with methyl methacrylate (MMA) combined with a cross-linker hexamethylene diisocyanate (HMDIC). Their dimensional stability and mechanical properties were then investigated. The impregnation of wood with monomer systems and polymerization was accomplished through vacuum…
44 Citations
Effect of coupling reactions on the mechanical and biological properties of tropical wood polymer composites (WPC)
- Materials Science
- 2012
Study on thermal and biodegradation resistance of tropical wood material composites
- Materials Science
- 2012
Thermal stability and decay resistance properties of tropical wood polymer composites (WPCs) were investigated in this study. WPCs were prepared from several selected tropical wood species by…
Effect of PVA-co-MMA Copolymer on the Physical, Mechanical and Thermal Properties of Tropical Wood Materials
- Materials Science
- 2014
The present study demonstrates the effect of copolymer on the physical, mechanical, and thermal properties of tropical wood and wood polymer composites (WPCs). Mixed monomers of methyl methacrylate…
Thermal tools in the evaluation of decayed and weathered wood polymer composites prepared by in situ polymerization
- Materials ScienceJournal of Thermal Analysis and Calorimetry
- 2015
This study aims to apply thermal tools in the evaluation of decayed and weathered wood polymer composites prepared by in situ polymerization with and without cross-linkers. Pinewood samples were…
Grafting polyethylene glycol dicrylate (PEGDA) to cell walls of poplar wood in two steps for improving dimensional stability and durability of the wood polymer composite
- Materials Science
- 2016
Abstract Polyethylene glycol (PEG) treatment is an effective approach to endow wood with higher dimensional stability (DS), which is still a concern under humid conditions. In this study, poplar wood…
Thermochemical and hygroscopicity properties of pinewood treated by in situ copolymerisation with methacrylate monomers
- Materials Science
- 2014
Tropical wood polymer nanocomposite (WPNC): The impact of nanoclay on dynamic mechanical thermal properties
- Materials Science
- 2012
Characterization and durability of wood-polymer composite prepared by in-situ polymerization of methyl methacrylate and styrene
- Materials Science
- 2012
The block of wood cavities by polymer coupled with the water resistance of polymer resulted in remarkable improvement of decay resistance and dimensional stability of wood.
Thermal Stability and Decay Resistance Properties of Tropical Wood Polymer Nanocomposites (WPNC)
- Materials Science
- 2013
The effects of nanoclay on the thermal stability and decay resistance properties of tropical wood polymer nanocomposites (WPNCs) were investigated in this work. WPNC were prepared from several…
Pinewood Composite Prepared by In Situ Graft Polymerization of Epoxy Monomer
- Materials Science
- 2017
Composites were prepared by graft polymerization ofglycidyl methacrylate (GMA) into low-quality Brazilianpinewood. Oven-dried pinewood samples wereimpregnated with GMA (1.5 wt% of benzoyl peroxideas…