Dielectric Properties of Composites Containing Meltextracted Co-based Microwires

@article{Luo2016DielectricPO,
  title={Dielectric Properties of Composites Containing Meltextracted Co-based Microwires},
  author={Yang Luo and Faxiang Qin and Jingshun Liu and Huan Wang and Fabrizio Scarpa and Pierre Adohi and Christian Brosseau and Hua-Xin Peng},
  journal={arXiv: Materials Science},
  year={2016}
}
2 Citations

Architecting 2D (LaBa2Fe3O8.55)0.3333 nanosheets using the modified sol-gel method and evaluation of their microwave, magnetic, and optical performance

The aim of this study was preparation of 2D (LaBa2Fe3O8.55)0.3333 nanosheets by the modified sol-gel route using the glucose as a novel precursor as well as evaluation of their microwave absorbing

References

SHOWING 1-10 OF 18 REFERENCES

Fe-based ferromagnetic microwires enabled meta-composites

The microwave properties of polymer-based glass fiber reinforced composites containing amorphous Fe77Si10B10C3 microwires in parallel and orthogonal arrays and their dependencies on external magnetic

Magnetic field and mechanical stress tunable microwave properties of composites containing Fe-based microwires

We report the magnetic field and stress tunable microwave behaviour of microwire-epoxy composites containing Fe-based microwires of different lengths. Observation of a crossover magnetic field at 600

Two-peak feature of the permittivity spectra of ferromagnetic microwire/rubber composites

The effective permittivity of CoFeSiB microwire/rubber composites is investigated in the microwave range of frequencies. As the frequency is varied between 0.3 and 6 GHz with or without magnetic

Magnetic field-dependent effective microwave properties of microwire- epoxy composites

In this work, we report on the observation of the electromagnetic parameters of glass-covered amorphous microwires/epoxy composites with various concentrations of microwires over a broad magnetic

Ferromagnetic microwires enabled multifunctional composite materials

Fabrication and Characterization of Melt-Extracted Co-Based Amorphous Wires

Amorphous Co68.15Fe4.35Si12.25B15.25 wires with smooth surface and circular cross section were fabricated by melt extraction technology using a copper wheel with a knife-edge cross section angle of

Instrumentation for microwave frequency-domain spectroscopy of filled polymers under uniaxial tension

Artificially engineered multiphase heterostructures with high permittivity, high permeability and low dielectric and magnetic losses are desired for microwave applications. In addition, the direct

Combined current-modulation annealing induced enhancement of giant magnetoimpedance effect of Co-rich amorphous microwires

We report on a combined current-modulation annealing (CCMA) method, which integrates the optimized pulsed current (PC) and DC annealing techniques, for improving the giant magnetoimpedance (GMI)