Development of controlled release formulations of imidacloprid employing novel nano-ranged amphiphilic polymers

@article{Adak2012DevelopmentOC,
  title={Development of controlled release formulations of imidacloprid employing novel nano-ranged amphiphilic polymers},
  author={Totan Adak and Jitendra Kumar and Najam Akhtar Shakil and Suresh Walia},
  journal={Journal of Environmental Science and Health, Part B},
  year={2012},
  volume={47},
  pages={217 - 225}
}
  • T. Adak, J. Kumar, +1 author S. Walia
  • Published 29 February 2012
  • Materials Science, Medicine
  • Journal of Environmental Science and Health, Part B
Amphiphilic copolymers, synthesized from poly (ethylene glycols) and various aliphatic diacids, which self assemble into nano-micellar aggregates in aqueous media, were used to develop controlled release (CR) formulations of imidacloprid [1-(6 chloro-3-pyridinyl methyl)-N- nitro imidazolidin-2- ylideneamine] using encapsulation technique. High solubilisation power and low critical micelle concentration (CMC) of these amphiphilic polymers may increase the efficacy of formulations. Formulations… Expand
Development of controlled release nanoformulations of carbendazim employing amphiphilic polymers and their bioefficacy evaluation against Rhizoctonia solani
TLDR
The bioefficacy evaluation of developed formulations of carbendazim was done against plant pathogenic fungi Rhizoctonia solani by the poison food technique method and the release of maximum amount from developed formulations was dependent on the molecular weight of PEGs and was found to increase with increasing molecular weights. Expand
Preparation and characterization of a novel imidacloprid microcapsule via coating of polydopamine and polyurea
Encapsulation of pesticides with polymeric materials is a promising approach to improve the efficacy of pesticide application and reduce the potential risks of pesticides to the environment andExpand
Alkyl glycol chitosan derivatives for encapsulation and controlled release of rotenone
Rotenone is a hydrophobic organic compound with the excellent insecticidal property. However, its hydrophobicity and the short period of efficacy due to rapid degradation in the presence of UV lightExpand
Co-encapsulation of imidacloprid and lambda-cyhalothrin using biocompatible nanocarriers: Characterization and application.
TLDR
Using the mixture of imidacloprid and lambda-cyhalothrin improves the residual effect over their use alone and can be a better alternative to conventional combination of these insecticides due to their more environmental friendliness. Expand
Physicochemical Characteristics and Slow Release Performances of Chlorpyrifos Encapsulated by Poly(butyl acrylate-co-styrene) with the Cross-Linker Ethylene Glycol Dimethacrylate.
TLDR
The extent of sustainable release decreased with increasing content of BA, St, or chlorpyrifos in the oil phase, but an adequate degree of cross-linking with EGMDA increased the extent ofustainable release considerably, and higher levels ofCross-Linking with EGDMA reduced the extentof sustainable release. Expand
Preparation and characterization of kasuga-silica-conjugated nanospheres for sustained antimicrobial activity
Controlled release formulation of pesticides is highly desirable for attaining the most effective utilization of the pesticide as well as reducing environmental pollution. Nano-sized controlledExpand
Amphiphilic polymer based nanoformulations of mancozeb for management of early blight in tomato
Abstract Controlled release (CR) nanoformulations of Mancozeb (Manganese-zinc double salt of N, N-bisdithiocarbamic acid), a protective fungicide, have been developed using poly (ethylene glycols)Expand
Role of nano-range amphiphilic polymers in seed quality enhancement of soybean and imidacloprid retention capacity on seed coatings.
TLDR
Nano-range amphiphilic polymers can be used to protect soybean seeds from ageing and formulations as seed treatments may produce improved and sustained efficacy with minimum environmental contamination. Expand
Controlled Release Profile of Imidacloprid-β-Cyclodextrin Inclusion Complex Embedded Polypropylene Filament Yarns
Imidacloprid-β-cyclodextrin (IMI-β-CD) inclusion complex was synthesized and effectively incorporated into filament yarns of polypropylene. The physical and thermal properties of IMI-β-CD inclusionExpand
Eco-friendly PEG-based controlled release nano-formulations of Mancozeb: Synthesis and bioefficacy evaluation against phytopathogenic fungi Alternaria solani and Sclerotium rolfsii
  • S. Majumder, N. Shakil, +4 authors P. Garg
  • Chemistry, Medicine
  • Journal of environmental science and health. Part. B, Pesticides, food contaminants, and agricultural wastes
  • 2016
TLDR
These formulations can be used to optimize the release of Mancozeb to achieve disease control for the desired period depending upon the matrix of the polymer used, and the maximum amount of active ingredient remains available for a reasonable period after application. Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 26 REFERENCES
Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers
  • J. Kumar, N. Shakil, +4 authors R. P. Pandey
  • Chemistry, Medicine
  • Journal of environmental science and health. Part. B, Pesticides, food contaminants, and agricultural wastes
  • 2010
TLDR
Depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period. Expand
Release kinetics of β-Cyfluthrin from its encapsulated formulations in water
TLDR
The results suggest that the application rate of β-cyfluthrin can be optimized to achieve insect control at the desired level and period. Expand
Development of controlled release formulations of carbofuran and evaluation of their efficacy against Meloidogyne incognita.
TLDR
A comparison of CR formulations with the commercial one showed an earlier degradation of carbofuran in the latter and relatively prolonged activity in the former, while with the rosin-yellow polymer, the dose could be reduced to half of its recommended dose for nematode control. Expand
Controlled release formulations of metribuzin: Release kinetics in water and soil
TLDR
Amongst the CR formulations of metribuzin, the release in both water and soil was the fastest in CMC and slowest in PVC, and the CMC-KAO composite reduced the rate of release as compared to CMC alone. Expand
Controlled release of isoproturon, imidacloprid, and cyromazine from alginate-bentonite-activated carbon formulations.
TLDR
It can be deduced that the use of bentonite and/or activated carbon sorbents reduces the release rate of the isoproturon and imidacloprid in comparison with the technical product and with alginate formulation without modifying agents. Expand
CHEMO-ENZYMATIC SYNTHESIS AND CHARACTERIZATION OF NOVEL FUNCTIONALIZED AMPHIPHILIC POLYMERS
ABSTRACT The condensation copolymerization of Dimethyl 5-hydroxyisophthalate (1) with Polyethylene glycols (PEGs) (2a–2d) of varying molecular weights, catalyzed by Novozyme-435 (immobilized CandidaExpand
Supramolecular assemblies based on copolymers of PEG600 and functionalized aromatic diesters for drug delivery applications.
TLDR
In vivo studies by encapsulating anti-inflammatory agents (aspirin and naproxen) in these polymeric nanomicelles and by applying topically resulted in significant reduction in inflammation. Expand
Development of Poly(ethylene glycol) Based Amphiphilic Copolymers for Controlled Release Delivery of Carbofuran
The formation of micelles in a solvent that is selective for one of the blocks is one of the most important and useful properties of block copolymers. We had synthesized copolymers of polyethyleneExpand
Biocatalytic “green” synthesis of PEG-based aromatic polyesters: optimization of the substrate and reaction conditions
The condensation copolymerization of a variety of linker molecules with polyethylene glycols (PEGs) of varying molecular weights, catalyzed by lipases under solvent-less conditions is reported.Expand
Synthesis of novel poly(ethylene glycol) based amphiphilic polymers
Abstract The synthesis of new amphiphilic polyesters based on poly(ethylene glycol) (PEGs) and studies on their solution properties are reported. Two novel monomers, dimethyl 5-n-butoxy isophthalateExpand
...
1
2
3
...