Development of CMOS Monolithic Pixel Sensors With In-Pixel Correlated Double Sampling and Fast Readout

@article{Battaglia2008DevelopmentOC,
  title={Development of CMOS Monolithic Pixel Sensors With In-Pixel Correlated Double Sampling and Fast Readout},
  author={Marco Battaglia and Jean-Marie Bussat and Devis Contarato and Peter Denes and Piero Giubilato and Lindsay Glesener},
  journal={IEEE Transactions on Nuclear Science},
  year={2008},
  volume={55},
  pages={3746-3750}
}
This paper presents the design and results of detailed tests of a CMOS active pixel chip for charged particle detection with in-pixel charge storage for correlated double sampling and readout in rolling shutter mode at frequencies up to 25 MHz. This detector is developed in the framework of R&D for the Vertex Tracker for a future e+e- Linear Collider. 

Figures from this paper

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor
A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D
Pixel circuit optimization for imaging applications using integrated circuit technologies
  • Jonan Venter, S. Sinha
  • Engineering
    2011 IEEE International Conference on Microwaves, Communications, Antennas and Electronic Systems (COMCAS 2011)
  • 2011
The most commonly used pixel structure in Integrated Circuit (IC) technologies is the three-transistor pixel structure (3T). This structure consists of a pixel, a reset transistor, as source follower
Development of Monolithic Pixel Sensors for the Linear Collider Vertex Detector
A receiving arrangement for equipment and/or objects in the passenger compartment of a motor vehicle, has a shaft with inserts arranged therein above one another, such as a tray, a cassette box, an

References

SHOWING 1-10 OF 18 REFERENCES
Response simulation of CMOS pixel sensors for the ILC vertex tracker
This paper reports preliminary results of a simulation of CMOS Monolithic active pixel sensors for Vertex Tracker application at the International Linear Collider.
Tracking and vertexing with a thin CMOS pixel beam telescope
Abstract We present results of a study of charged particle track and vertex reconstruction with a beam telescope made of four layers of 50 μ m -thin CMOS monolithic pixel sensors using the 120 GeV
Beam test results from a prototype for the delphi microvertex detector
Abstract Results are presented from a test in the CERN SPS North Area of a prototype of the DELPHI microvertex detector. Full-sized modules built up from prototype ac-coupled detectors and VLSI
Development of Monolithic CMOS Pixel Sensors for the ILC at LBNL
The International Linear Collider (ILC) project aims at designing and constructing a machine able to collide e+e− beams at center-of-mass energies from 0.35 TeV up to 1 TeV with luminosities in
Characterization of a Tunable Quasi-Monoenergetic Neutron Beam from Deuteron Breakup
A neutron irradiation facility is being developed at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory for the purposes of measuring neutron reaction cross sections on radioactive
Marlin and LCCD—Software tools for the ILC
Abstract The next big project proposed in particle physics is the International Linear Collider ( ILC ), an electron positron collider with an energy reach of around 1 TeV . The ongoing optimization
LCIO - A persistency framework for linear collider simulation studies
TLDR
This work defines an ''abstract object persistency layer'' that will be used by the applications and presents a persistency framework, called LCIO (Linear Collider I/O), which has to fulfill the requirements of the different groups today and be flexible enough to be adapted to future needs.
Nucl
  • Instr. and Meth,, A572
  • 2007
Nucl
  • Instrum. Meth. B261
  • 2007
Nucl. Instrum. Meth. A
  • Nucl. Instrum. Meth. A
  • 2007
...
1
2
...