Development of Al-12Si-xTi system active ternary filler metals for Al metal matrix composites

@article{Zhang2012DevelopmentOA,
  title={Development of Al-12Si-xTi system active ternary filler metals for Al metal matrix composites},
  author={Guifeng Zhang and W. Su and J. Zhang and Akio Suzumura},
  journal={Transactions of Nonferrous Metals Society of China},
  year={2012},
  volume={22},
  pages={596-603}
}
  • Guifeng Zhang, Guifeng Zhang, +2 authors Akio Suzumura
  • Published 2012
  • Materials Science
  • Transactions of Nonferrous Metals Society of China
  • Abstract To improve the wettability of Al metal matrix composites (Al-MMCs) by common filler metals, Al-12Si-xTi (x=0.1, 0.5, 1, 3.0; mass fraction, %) system active ternary filler metals were prepared. It was demonstrated that although the added Ti existed within Ti(Al1-xSix)3 (0≤x≤0.15) phase, the shear strength and shear fracture surface of the developed Al-12Si-xTi brazes were quite similar to those of traditional Al-12Si braze due to the presence of similar microstructure of Al-Si eutectic… CONTINUE READING
    8 Citations

    Figures from this paper

    The Effect of Ti on Microstructural Characteristics and Reaction Mechanism in Bonding of Al-Ceramic Composite
    • 2

    References

    SHOWING 1-10 OF 42 REFERENCES
    Transient liquid phase bonding of aluminium-based metal matrix composite with Al-Cu alloy interlayer
    • 1
    Diffusion brazing of short Al2O3 fiber-reinforced aluminium composite
    • 13
    Influence of Ti addition on the microstructure and hardness properties of near-eutectic Al–Si alloys
    • 64
    • PDF
    Microstructural chracterisation of Al–Si–xTi cast alloys
    • 15
    • PDF