Development, design and applications of structural capacitors

@article{Chung2018DevelopmentDA,
  title={Development, design and applications of structural capacitors},
  author={D. D. L. Chung},
  journal={Applied Energy},
  year={2018}
}
  • D. Chung
  • Published 1 December 2018
  • Engineering
  • Applied Energy

Figures from this paper

Recent advances on fiber-reinforced multifunctional composites for structural supercapacitors

Engineering the conventional electrode designs as well as exploring prospective materials and prominent electrolytes, all of which are critically required to tackle the fundamental limitations

A large areal capacitance structural supercapacitor with a 3D rGO@MnO2 foam electrode and polyacrylic acid–Portland cement–KOH electrolyte

Recently, structural supercapacitors have attracted considerable attention due to their concurrent capability to store electrochemical energy and support mechanical loads. However, the greatest

Electrochemical Energy Storage Properties of High-Porosity Foamed Cement

Foamed porous cement materials were fabricated with H2O2 as foaming agent. The effect of H2O2 dosage on the multifunctional performance is analyzed. The result shows that the obtained specimen with

A review of multifunctional polymer-matrix structural composites

  • D. Chung
  • Engineering
    Composites Part B: Engineering
  • 2019

A Route to Sustainable Aviation: A Roadmap for the Realization of Aircraft Components With Electrical and Structural Multifunctionality

Increased electrification of aircraft power systems has been widely presented as a route toward meeting environmental and emissions targets for aircraft performance, via more-electric aircraft and

References

SHOWING 1-10 OF 187 REFERENCES

Structural dielectrics for multifunctional capacitors

As U.S. Army systems and vehicles become more dependent on electronic devices and subsystems, there is an increasing need for improving the mass- and volume-efficiency of energy storage components.

An Experimental Study into the Effect of Damage on the Capacitance of Structural Composite Capacitors

TLDR
The structural capacitor material was found to maintain its capacitance even after significant intralaminar matrix cracking in the CFRP electrodes from high tensile mechanical loads.

The challenges of achieving good electrical and mechanical properties when making structural supercapacitors

The paper presents results associated with the electro-mechanical characterization of a composite material with power storage capability, identified throughout the paper as a structural

Design and performance of multifunctional structural composite capacitors

Dielectric capacitors with mechanical load-bearing capability have been constructed by laminating glass-epoxy prepregs with metalized film electrodes. Mechanical characterization and high-voltage

Electro-mechanical characterization of structural supercapacitors

The paper presents electrical and mechanical properties of structural supercapacitors and discusses limitations associated with the approach taken for the electrical properties evaluation. The

Energy Storage Structural Composites: a Review

This study demonstrates the construction of a multifunctional composite structure capable of energy storage in addition to load bearing. These structures were assembled and integrated within the

Materials chemistry toward electrochemical energy storage

Materials chemistry focuses on all aspects of the production of electrode materials or the properties or applications of materials related to energy storage, which thus plays an important role in the
...