Design of thermostat system based on Proteus simulation software

@article{Zhenwei2011DesignOT,
  title={Design of thermostat system based on Proteus simulation software},
  author={Han Zhenwei and Song Ke-fei},
  journal={Proceedings of 2011 International Conference on Electronic \& Mechanical Engineering and Information Technology},
  year={2011},
  volume={4},
  pages={1901-1904}
}
  • Han Zhenwei, Song Ke-fei
  • Published 19 September 2011
  • Engineering, Computer Science
  • Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology
In order to solve the problem of precise temperature control, the thermoelectric cooler (TEC) principle widely used is analyzed for the design of the whole control process and selection of control parameters, and then accurate simulation model of the TEC is established in Proteus simulation software. Moreover, combined with the traditional circuit simulation model, the temperature control loop is designed, and the response characteristics of the system are tested using an input signal similar… 

Figures from this paper

References

SHOWING 1-10 OF 10 REFERENCES
Temperature precise control in hot embossing device
A thermoelectric cooler was used as the main component of temperature controlling in hot embossing device to acquire high precision temperature control.The control model of the thermoelectric cooler
Gas flux control of testing system for micro/miniature fuel cell
Based on the requirements of Direct Methanol Fuel Cell(DMFC) testing,a subsystem of gas flux control was established with several subassemblies consisting of a multiple function datum collection
TEC based thermostat system for high-power semiconductor laser
Since TEC has the disadvantage of limited power and low efficiency,the cooling effect is not as effective as expected when used to control the temperature of high-power laser diodes.In this
Fuzzy Temperature Control of A Thermoelectric Cooler
  • A. Aly, A. El-Lail
  • Engineering
    2006 IEEE International Conference on Industrial Technology
  • 2006
Thermoelectric coolers (TEC) are used in a variety of applications that require extremely stable temperature control. In this paper a fuzzy controller is applied for the cold-end temperature control
Adaptive inverse control of stable platform
To improve dynamic performance and to meet the demands of high precision,fast transient response and real-time tracking ,an automatic control method for stabilizing a airborn platform is
Modeling of a Closed-Loop Pump Laser Temperature Control Unit, Including Nonlinear Electronics Controller, and Thermoelectric Cooler and Mechanical Assembly
Recent advances in pump lasers have led to their use in a wide variety of medical, industrial, defense, and space applications. Examples include dense wavelength division multiplexing (DWDM) and long
Temperature control with a thermoelectric cooler (TEC) during laser decapsulation of plastic packages
  • H. Kor, A. Chang, C. Gan
  • Physics, Materials Science
    2010 17th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits
  • 2010
Ablation was carried out on high voltage Schottky rectifiers at 25°C and −5°C (with a thermoelectric cooler or TEC), at 1.0 W and 3.9 W of laser power. In-situ measurement of the reverse current was
AN3318 HFAN-08.2.0: How to control and compensate a thermoelectric cooler
  • Sep. 2004.
  • 2004
Maxim corporation , " AN 3318 HFAN - 08 . 2 . 0 : How to control and compensate a thermoelectric cooler , " Sep
  • 2004
Maxim corporationAN3318 HFAN-08.2.0: How to control and compensate a thermoelectric cooler
  • Maxim corporationAN3318 HFAN-08.2.0: How to control and compensate a thermoelectric cooler
  • 2004