Design of radio frequency power amplifiers for cellular phones and base stations in modern mobile communication systems

@inproceedings{Wu2009DesignOR,
  title={Design of radio frequency power amplifiers for cellular phones and base stations in modern mobile communication systems},
  author={Lei Wu},
  year={2009}
}
  • Lei Wu
  • Published 2009
  • Computer Science, Engineering
The mobile radio communication has begun with Guglielmo Marconi's and Alexander Popov's experiments with ship-to-shore communication in the 1890's. Land mobile radio telephone systems have been used since the Detroit City Police Department installed the first wireless communication system in 1921. Since that time, radio systems have become more and more important for both voice and data communication. The modern mobile communication systems are mainly designed in high frequency ranges due to… Expand
Impedance Matching Network Design for Class C Power Amplifier
TLDR
This research designed a class C power amplifier that operates in frequency range (200MHz -500MHz) with input power 0.63watt and output power 10watt, and the matching network for input and output is implementing for frequency range because of the wide band frequency range for transistor used. Expand
High-Efficiency High-Gain 2.4 GHz Class-B Power Amplifiers in 0.13 µm CMOS for Wireless Communications
This paper presents high-efficiency high-gain 2.4 GHz power amplifiers (PAs) for wireless communications. Two class-B PAs are designed and verified in 0.13 µm CMOS mixed-signal/RF process provided byExpand

References

SHOWING 1-10 OF 81 REFERENCES
A Compact Multiband Planar Antenna for Mobile Handsets
A novel compact planar antenna is presented in this letter, which can operate in five bands: GSM (890-960 MHz), DCS (1710-1880 MHz), PCS (1850-1990 MHz), UMTS (1920-2170 MHz), and WLAN (2400-2484Expand
A 1.75-GHz polar modulated CMOS RF power amplifier for GSM-EDGE
This work presents a fully integrated linearized CMOS RF amplifier, integrated in a 0.18-/spl mu/m CMOS process. The amplifier is implemented on a single chip, requiring no external matching orExpand
A 71-MHz CMOS IF-baseband strip for GSM
TLDR
An intermediate-frequency (IF) baseband strip for a superheterodyne GSM receiver developed in a 0.25-/spl mu/m CMOS technology is presented and shows the high linearity required by the blocking and intermodulating signals, which are not completely suppressed by the IF filter. Expand
Microwave Mobile Communications
TLDR
An in-depth and practical guide, Microwave Mobile Communications will provide you with a solid understanding of the microwave propagation techniques essential to the design of effective cellular systems. Expand
HBT power amplifier with dynamic base biasing for 3G handset applications
In this paper, a performance optimization of a digital signal processing driven and dynamically biased 3G handset's power amplifier technique is proposed, simulated and implemented. This techniqueExpand
A CMOS high efficiency +22 dBm linear power amplifier
  • Yongwang Ding, R. Harjani
  • Computer Science
  • Proceedings of the IEEE 2004 Custom Integrated Circuits Conference (IEEE Cat. No.04CH37571)
  • 2004
TLDR
A new class of operation (parallel A&B) for power amplifiers that improves both their dynamic range and power efficiency and reduces DC power consumption by up to 50% in the linear operation range is presented. Expand
The Design of CMOS Radio-Frequency Integrated Circuits
  • T. Lee
  • Computer Science, Engineering
  • 1998
This expanded and thoroughly revised edition of Thomas H. Lee's acclaimed guide to the design of gigahertz RF integrated circuits features a completely new chapter on the principles of wirelessExpand
Digital communications
  • J. Mazo
  • Computer Science
  • Proceedings of the IEEE
  • 1985
TLDR
This month's guest columnist, Steve Bible, N7HPR, is completing a master’s degree in computer science at the Naval Postgraduate School in Monterey, California, and his research area closely follows his interest in amateur radio. Expand
A 1 W CMOS power amplifier for GSM-1800 with 55% PAE
  • C. Fallesen, P. Asbeck
  • Engineering
  • 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157)
  • 2001
Until recently it was the common opinion that CMOS RF power amplifiers were not feasible for mobile handsets. This paper presents a CMOS power amplifier for the GSM-1800 standard, with only twoExpand
A second harmonic class-F power amplifier in standard CMOS technology
For personal communications systems, the highest possible integration on monolithic technology of all RF functions is desirable. The most difficult component to be monolithically integrated with allExpand
...
1
2
3
4
5
...