Design of Universal Filter using MO-CCCDTA on 32nm FinFET Technology

@article{Chakraborty2016DesignOU,
  title={Design of Universal Filter using MO-CCCDTA on 32nm FinFET Technology},
  author={Shantanu Chakraborty},
  journal={International Journal of Computer Applications},
  year={2016},
  volume={144},
  pages={36-39}
}
  • S. Chakraborty
  • Published 2016
  • Computer Science
  • International Journal of Computer Applications
The paper aims at designing a universal filter using current mode circuit. The main advantages of current mode circuits over voltage mode circuits are better linearity in performance,higher bandwidth responses, low noise performances. The preferred technology is 32nm FinFET technology since CMOS technology shows short channel effects and DIBL (Drain Induced Bareer Lowering) which hampers the performance of the circuit. As channel length reduces from 45nm CMOS technology to 32nm technology, the… Expand

References

SHOWING 1-10 OF 15 REFERENCES
A voltage-mode circuit structure using FinFet Transconductance Topolog
Abstract— FinFet is evolved to overcome Moore's law limitations in nanometer regime. Transconductance circuit produces differential output currents, when differential input voltages are applied. AExpand
CMOS current-controlled current differencing transconductance amplifier and applications to analog signal processing
Abstract This article presents design of a basic current-mode building block for analog signal processing, named as current-controlled current differencing transconductance amplifier (CCCDTA). ItsExpand
Filters with Current Amplifiers for High-speed Communication
  • I. Lattenberg, K. Vrba
  • Computer Science
  • International Conference on Networking, International Conference on Systems and International Conference on Mobile Communications and Learning Technologies (ICNICONSMCL'06)
  • 2006
TLDR
The paper deals with the novel filtration techniques for analog high-speed data signal preprocessing working on the base of a pure current mode filters and various possibilities of current amplifier realization such as basic building blocks for circuits working in the current-mode. Expand
Universal Current-Mode Biquad Filter Using a VDTA
This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single groundedExpand
Single CDTA Based Current-Mode Universal Filter with grounded Capacitors
In this paper, a new current-mode universal filter based on current differencing transconductance amplifier (CDTA) is presented. The proposed circuit uses one CDTA, two grounded capacitors and twoExpand
Single MO-CCCCTA-Based Electronically Tunable Current/Trans-Impedance-Mode Biquad Universal Filter
This paper presents an electronically tunable current/trans-impedance-mode biquad universal filter employing only single multi-output current controlled current conveyor trans-conductance amplifierExpand
CDTAs –based Current-Mode Multifunction Filter Employing Grounded Capacitors
TLDR
The proposed filter employs two current differencing transconductance amplifier and only two passive elements to realize lowpass and bandpass filter functions and has been tested with PSPICE simulation program. Expand
FinFET-Benefits , Drawbacks and Challenges
FinFET is a promising alternative to conventional MOSFET which has reached its limits and has too much leakage for too little performance gain. FinFE T is being recommended as the basis for future ICExpand
A State Variable Method for the Realization of Universal Current-Mode Biquads
A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, lowExpand
CMOS Analog Circuit Design
1.1 ANALOG INTEGRATED CIRCUIT DESIGN 1.2 NOTATION, SYMBOLOGY AND TERMINOLOGY 1.3 ANALOG SIGNAL PROCESSING 1.4 EXAMPLE OF ANALOG VLSI MIXED-SIGNAL CIRCUIT DESIGN 2.1 BASIC MOS SEMICONDUCTORExpand
...
1
2
...