• Corpus ID: 53552862

Design of Regenerative Braking System for an Electric Vehicle ( EV ) Modified from Used Car *

@inproceedings{Chanthanumataporn2011DesignOR,
  title={Design of Regenerative Braking System for an Electric Vehicle ( EV ) Modified from Used Car *},
  author={Saharat Chanthanumataporn and Sarawut Lerspalungsanti and Monsak Pimsarn},
  year={2011}
}
In general one of the main objectives of regenerative braking system is to recover as much as possible kinetic energy while braking instead of being dispersed in form of heat by only friction brake. In Electric Vehicle (EV) with regenerative braking system, most braking energy is converted to electrical form via generator switched from its motor, and stored in storage device or battery to use in vehicle’s electric application or use to propel itself. Thus, the EV with regenerative braking… 

Regenerative Brake: To Harness the Kinetic Energy of Braking

Regenerative Braking Systems (RBS) provide an efficient method to assist railways and hybrid electric buses to achieve better fuel economy while lowering exhaust emissions. In this paper regenerative

Storage of Regenerative Breaking Energy in Electrical Vehicles

-Electrical vehicles are the really important innovation for saving energy in the world. Electrical vehicles have electric motors and regenerative braking is used thanks to electric motor’s

Design & Fabrication of Mechanism for Recovery of Kinetic Energy in Bicycle Using Flywheel

a vehicle is considered to be in motion only when the kinetic energy acts on it. The piston transfers the energy acquired from the engine to the shaft which in turn drives the wheels of the vehicles.

DESIGN AND ANALYSIS OF KINETIC ENERGY RECOVERY SYSTEM IN BICYCLES

Kinetic Energy Recovery System (KERS) is a system for recovering the moving vehicle's kinetic energy under braking and also to convert the usual loss in kinetic energy into gain in kinetic

References

SHOWING 1-9 OF 9 REFERENCES

A study on regenerative braking for a parallel hybrid electric vehicle

In this paper, a regenerative braking algorithm is presented and performance of a hybrid electric vehicle (HEV) is investigated. The regenerative braking algorithm calculates the available

Regenerative braking algorithm for a parallel hybrid electric vehicle with continuously variable transmission

A novel regenerative braking algorithm based on continuously variable transmission is proposed to make effective and maximum use of the brake energy in order to improve fuel economy. In the braking

Regenerative Braking Algorithm for a HEV with CVT Ratio Control during Deceleration

It is found from the simulation that the regenerative braking algorithm including the CVT ratio control provides improved fuel economy as much as 4 percent for federal urban driving schedule.

Vehicle Stability Control with Regenerative Braking and Electronic Brake Force Distribution for a Four-Wheel Drive Hybrid Electric Vehicle

Abstract Vehicle stability control for a four-wheel drive (4WD) hybrid electric vehicle is investigated using the regenerative braking of the rear motor and electrohydraulic brake (EHB). A

Intelligent control of the regenerative braking in an induction motor drive

This work deal with the problem related to the energy recovered in an induction motor drive. During deceleration, a regenerative braking control strategy allows the recovery of the mechanical energy

Development and Use of a Regenerative Braking Model for Parallel Hybrid Electric Vehicle , August 2000

  • 2000