Corpus ID: 136451920

Design of Electrode Coatings for Bimetallic Welds

@inproceedings{Bhandari2017DesignOE,
  title={Design of Electrode Coatings for Bimetallic Welds},
  author={Deepak Bhandari and Rajeev Mehta and Rahul Chhibber and Navneet Arora},
  year={2017}
}
ii TABLE OF CONTENTS iii-vii LIST OF TABLES viii-x LIST OF FIGURES xi-xv CHAPTER 

Figures and Tables from this paper

References

SHOWING 1-10 OF 174 REFERENCES
Some Aspects of Oxidation-Reduction Reactions under Carbon-Bearing Flux Welding
The authors have completed thermodynamic calculations of oxidation-reduction processes under submerged arc welding with application of carbon containing additive. The calculations have shown thatExpand
Slag-metal reactions during welding: Part I. Evaluation and reassessment of existing theories
A critical review of current thermodynamic theories of slag-metal reactions is presented. A series of preliminary experiments indicates that the previously proposed droplet theory is incorrect andExpand
Slag-metal reactions during welding: Part III. Verification of the Theory
A previously developed kinetic model of alloy transfer (Part II)[1] is tested experimentally for transfer of Mn, Si, Cr, P, S, Ni, Cu, and Mo. The results show very good agreement between theory andExpand
Slag-metal reactions during welding: Part II. Theory
A kinetic model is developed to describe the transfer of alloying elements between the slag and the metal during flux-shielded welding. The model accounts for changes in alloy recovery based on theExpand
The effect of titanium in SMA C-Mn steel multipass deposits
The influence of varying the titanium content of a basic electrode on weld metal composition, microstructure and properties has been studied. It was found that the transfer of a small amount ofExpand
The effect of titanium in manganese-containing SMA weld deposits
The effect of titanium, in the range of 5 to 250 ppm, on the microstructure and properties of shielded metal arc welds containing 0.6 to 1.8% Mn has been investigated. A complex interactive effectExpand
Development of a Coating Formulation Procedure for Ni-base Shielded Metal Arc Electrodes with Varying Core Wire Composition
In order for manufacturers of shielded metal arc welding (SMAW) electrodes to stay competitive, they must be able to have flexibility in the performance of their products, as well as flexibility inExpand
Microstructure and microchemistry of hard zone in dissimilar weldments of Cr-Mo steels
This paper reports the microstructure and microchemistry of "hard" and "soft" zones in a dissimilar weldment between 9Cr-lMo and 21/4Cr-1Mo ferritic steel subjected to postweld heat treatmentsExpand
The effect of magnesium content on the arc stability of SMAW E7016-C2L/8016-C2 covered electrodes
The influence of magnesium powder additions to the coating of basic, low hydrogen AWS E7016-C2L/8016-C2 electrodes on the arc stability was studied, as well as the effects of the welding current typeExpand
WRC-1992 constitution diagram for stainless steel weld metals : a modification of the WRC-1988 diagram
To increase the scope and accuracy of Ferrite Number (FN) prediction in stainless steel weld metal and related dissimilar metal joints, a modif ication of the Weld ing Research Council 1988 diagramExpand
...
1
2
3
4
5
...