Design and simulation of networks for midrange wireless power transfer

@article{Beams2013DesignAS,
  title={Design and simulation of networks for midrange wireless power transfer},
  author={David M. Beams and Varun Nagoorkar},
  journal={2013 IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS)},
  year={2013},
  pages={509-512}
}
  • D. Beams, V. Nagoorkar
  • Published 2 December 2013
  • Engineering
  • 2013 IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS)
This paper presents the design and simulation of an efficient four-coil wireless power transfer (WPT) system using magnetically-coupled resonant circuits (MCRC). Simulations show that a system capable of transmitting power over a transmitter-to-receiver separation of 2m with efficiency exceeding 70% at a frequency of 100kHz. 

Figures and Tables from this paper

A Study of Wireless Electricity-An Emerging Technology
TLDR
A proposed wireless power transfer circuit is simulated using MULTISIM software and also implemented in hardware and a literature survey of the wireless power transmission is discussed.
A Systematic Review of Wireless Transmission System
TLDR
This review paper presents a comprehensive evaluation of the research works in wireless power transmission from the time of Andre-Marie Ampere in 1826 till date and concludes with a conclusive review of the challenges, and limitations faced, the application, advantages, and disadvantages, of wireless power Transmission.
Secure Energy Encryption for Wireless Power Transfer
TLDR
An architecture and a generic encryption model in the context of certificateless cryptography for secure wireless power transfer systems is proposed and the obtained session key is used to generate sequence of switching frequencies in both party devices to allow for secure energy transmission and reception.

References

SHOWING 1-10 OF 17 REFERENCES
Validation of a reflected-impedance design method for wireless power transfer applications
  • D. Beams, S. G. Annam
  • Engineering
    2012 IEEE 55th International Midwest Symposium on Circuits and Systems (MWSCAS)
  • 2012
TLDR
The method appears useful for first-pass (approximate) design, but accurate simulation requires consideration of mutual inductances of non-adjacent coils.
Recent progress in mid-range wireless power transfer
This is a review paper describing recent progress of mid-range applications of wireless power transfer. Starting from Tesla's principles of wireless power transfer a century ago, it outlines
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
TLDR
A quantitative model is presented describing the power transfer of self-resonant coils in a strongly coupled regime, which matches the experimental results to within 5%.
Research on the wireless power transmission system based on coupled magnetic resonances
  • Q. Wang, Hong Li
  • Physics
    2011 International Conference on Electronics, Communications and Control (ICECC)
  • 2011
This paper analyses and designs a kind of wireless power transmission system via coupled magnetic resonances. It introduces the wireless power transmission technology, and expounds the principle of
Circuit-Model-Based Analysis of a Wireless Energy-Transfer System via Coupled Magnetic Resonances
TLDR
A simple equivalent-circuit model is developed for a wireless energy-transfer system via coupled magnetic resonances, and it is seen that the system can transfer power over a midrange of a few meters and that impedance matching is important to achieve high efficiency.
A wireless power station for laptop computers
A wireless power system via magnetic induction that can deliver 32 W to a laptop is designed and fabricated. A 60% peak end-to-end regulated efficiency is achieved. A load detection scheme is also
Failure mechanisms in MOSFET square-wave drivers for wireless power transfer applications
Reports from experimental laboratory work have described catastrophic failure of power MOSFETs used in square-wave voltage sources driving resonant four-coil wireless power-transfer (WPT) networks.
Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants
TLDR
This work has analyzed the four-coil energy transfer systems and outlined the effect of design parameters on power-transfer efficiency, and a proof-of-concept prototype system is implemented and confirms the validity of the proposed analysis and design techniques.
A design methodology for multi-kW, large air-gap, MHz frequency, wireless power transfer systems
In a loosely coupled kW level wireless power transfer system, it is difficult to consider multiple design considerations simultaneously because of the system complexity. Circuit design methodology is
Calculation of mutual inductance from magnetic vector potential for wireless power transfer applications
  • D. Beams, S. G. Annam
  • Physics
    Proceedings of the 2012 44th Southeastern Symposium on System Theory (SSST)
  • 2012
Recent renewed interest in commercial development of wireless power transfer through magnetically-coupled resonant circuits has shown the need for a computational tool that can calculate the mutual
...
...