• Corpus ID: 53595247

Design and development of a tomato manual slicing machine

@inproceedings{KamaldeenO2013DesignAD,
  title={Design and development of a tomato manual slicing machine},
  author={S KamaldeenO.},
  year={2013}
}
Principle of slicing was reviewed and tomato slicing machine was developed based on appropriate technology. Locally available materials like wood, stainless steel and mild steel were used in the fabrication. The machine was made to cut tomatoes in 2cm thickness. The capacity of the machine is 540.09g per minute and its performance efficiency is 70%. 
Performance evaluation of slicer cum shredder for commercialization
The present work focuses on development of an improved portable multipurpose slicer cum shredder that takes care of the problems mentioned above. Multipurpose vegetable slicer cum shredder
Development of a motorized tomato (Solanumlycopersicum l.) Slicer
In an attempt to solve the problem associated with slicing of tomato which is an important operation required in tomato drying industries, a motorized tomato slicer was designed fabricated and
Development and Performance Evaluation of Aloe Vera Leaf Slicing Machine
The Aloe plant belongs to a member of the family Liliaceae, which comprises more than 360 different species. Aloe Vera has a number of uses and mainly they are used as a food preservative and herbal
Design and Simulation of A Vegetable Shredding and Washing Machine
–Value addition to vegetables prior to domestic use can be attained via processes such as hygienic washing, shredding, and packaging. Manual processing of vegetables is time-consuming while
Performance Evaluation of Aloe vera Leaf Slicing Machine
TLDR
This work has shown that the time required to slice equal length of Aloe vera with the machine is 24 times less than the manual process, and the uniform sized slices obtained from the machine will give a uniform drying for further processing of whole leaf powder which is used in cosmetic and pharmaceutical industries.

References

SHOWING 1-10 OF 15 REFERENCES
Mechanical engineering design
Part I Basics1 Introduction2 Statistical Considerations3 Materials4 Load and Stress Analysis5 Deflection and StiffnessPart II Failure Prevention6 Failures Resulting from Static Loading7 Fatigue
Mechanic of Machineries Advance Theory and Examples, Edward Anold Publishing Ltd., London, 2nd Edition
  • 1974
Development of Potato Slicing Machine
  • Department of Mechanical Engineering,
  • 2007
Textbook of Machine Design Eurasia Publishing house
  • (PVT) Ltd. Ram Nagar, New
  • 2005
Textbook of Machine Design Eurasia Publishing house (PVT) Ltd. Ram Nagar, New Delhi-110 055
  • 2005
Fundamental of Machine Element
  • 1999
Engineering Design Graphics, Addison Wesley Publishing Company, Inc Philippines
  • 1977
Mechanic of Machineries Advance Theory and Examples
  • 1974
Design of Machine Element. The Machine Company
  • 1970
...
1
2
...