Design and Fabrication of Voice Controlled Unmanned Aerial Vehicle

@article{Anand2016DesignAF,
  title={Design and Fabrication of Voice Controlled Unmanned Aerial Vehicle},
  author={Sonia S Anand and R. Mathiyazhagan and S. Kalaimagal},
  journal={International journal of engineering research and technology},
  year={2016},
  volume={4}
}
Unmanned Aerial Vehicles have gained well known attention in recent years for a numerous applications such as military, civilian surveillance operations as well as search and rescue missions. The UAVs are not controlled by professional pilots and users have less aviation experience. Therefore it seems to be purposeful to simplify the process of aircraft controlling. The objective is to design, fabricate and implement an unmanned aerial vehicle which is controlled by means of voice recognition… 

Figures and Tables from this paper

References

SHOWING 1-10 OF 23 REFERENCES
Design of A Quad Copter and Fabrication
TLDR
The regular design of the quadcopter is modified and the static analysis is done on frame to sustain the loads generated in these vehicles and it is concluded that small deformation occurred on the center plates are safe and within the limit.
Build Your Own Quadrotor: Open-Source Projects on Unmanned Aerial Vehicles
TLDR
A survey on publicly available open-source projects (OSPs) on quadrotor unmanned aerial vehicles (UAVs) finds that relatively simple structures of quadrotors has promoted interest from academia, UAV industries, and radio-control hobbyists alike.
Design and Construction of a Small-scale Rotorcraft UAV System
96 Abstract— A rotorcraft UAV is any flying machine that produces lift from rotors turning in a plane that is normally close to the horizontal. The task of building a rotorcraft UAV platform for
Design, Analysis and Fabrication of Quadcopter
TLDR
Finite element analysis is done on the frame so as to sustain the loads generated in the vehicle and concluded that small deformation occurred on the center plates are safe and within the limit.
Multicopter UAV design optimization
TLDR
This paper presents a design optimization process of a multirotor designed for 4, 6 and 8 actuators, and the design with the lowest value of the objective function is the optimal design.
AR-Drone as a Platform for Robotic Research and Education
TLDR
The AR-Drone quadrotor helicopter is presented as a robotic platform usable for research and education and the drone ability to act as an external navigation system for a formation of mobile robots is demonstrated.
Simplistic Sonar based SLAM for low-cost Unmanned Aerial Quadrocopter systems
TLDR
This paper outlines and implements a basic algorithm to autonomously fly a quadcopter using low-cost sonar sensors in a GPS-denied environment and outlines a method for using simple sonar distance data to map the authors' environment.
Designing a spatially aware and autonomous quadcopter
TLDR
This project, a proof-of-concept of a quadcopter system for autonomous navigation and mapping of an unknown environment, demonstrates the feasibility of developing inexpensive ISR systems with commercially available products.
Design of a four-rotor aerial robot
The design and fabrication of a prototype four-rotor vertical take-off and landing (VTOL) aerial robot for use as indoor experimental robotics platform is presented. The flyer is termed an X4-flyer.
...
...