• Corpus ID: 582216

Design and Economics of Reactive Power Control in Distribution Substation Khin Trar Trar

@inproceedings{2009DesignAE,
  title={Design and Economics of Reactive Power Control in Distribution Substation Khin Trar Trar},
  author={},
  year={2009}
}
  • Published 2009
  • Engineering, Physics
An electrical power system consists of three principle components that are generation station transmission line and distribution systems. A distribution system connects all the individual loads in a given to the transmission lines. All inductive loads require two kinds of power to operate with active power(kW) and reactive power (kVAR) in design and operation of alternating current electric power systems. A significant factor reactive power has been recognized. There is important interrelation… 

Figures and Tables from this paper

The Effect of Power factor Improvement on Switching Transients: A Case of FUMMAN Agricultural Products Industry Plc.
Industrial loads are mostly inductive and hence operate at low power factor. Several methods including the installation of capacitor banks are available for improving power factor in order to reduce
A Method of Finding Capacitor Value for Power Factor Improvement
In recent years, increasing attention has been paid to minimize the energy cost and inefficiency in electricity generation, transmission and distribution. This paper presents an approach in order to
Voltage Control Mangement
A power system is said to be well designed if it gives a good quality of reliable supply. By good quality is meant the voltage levels within the reasonable limits. Practically all the equipment on
Three Phase Digitally Controlled Power Factor Improvement System
TLDR
A time sharing switching circuit is designed so as to scan the three phases sequentially to determine power factor for each phase using the same control circuit.
Analysis of the Operational Parameters of a Medium Voltage Cable Line
TLDR
The paper presents the results from the studies of the operating parameters of a medium-voltage cable line by means of a computer model, developed in MatLab/Simulink, concerning the influence of the load over the line on the generated by the line reactive capacitive power and on the losses of power and voltage.
Use of Slip Ring Induction Generator for Wind Power Generation
Wind energy is now firmly established as a mature technology for electricity generation. There are different types of generators that can be used for wind energy generation, among which Slip ring
PARTICLE SWARM OPTIMIZATION BASED NEURAL NETWORK APPROACH FOR SOLVING ECONOMIC DISPATCH PROBLEM IN POWER SYSTEM
The electric power framework comprises of the producing element's distribution with least fuel price and furthermore thinks about the transmission vitality. Model Predictive Control (MPC) approach
Automatic Power Factor Improvement By Using Microcontroller
This paper represents the most effective automatic power factor improvement by using static capacitors which will be controlled by a Microcontroller with very low cost although many existing systems
Development of Hybrid Algorithm Based on PSO and NN to Solve Economic Emission Dispatch Problem
TLDR
A hybrid technique is used to minimize the cost function of generating units and emission cost by balancing the total load demand and to decrease the power loss by optimizing generating power and predicted load demand.
CDMWCD-CLOSED DRAINAGE MUD WASTE COLLECTING DEVICE
The electric power framework comprises of the producing element's distribution with least fuel price and furthermore thinks about the transmission vitality. Model Predictive Control (MPC) approach

References

SHOWING 1-10 OF 11 REFERENCES
Electrical Power Engineering
This book provides information and supporting data on the fundamentals of electrical power engineering in electrical utility companies, as well as in large industrial and commercial facilities with
The Electrical Engineering Handbook
TLDR
The present work focuses on circuits, electronics, and electromagnetics, which consist of circuits, which are concerned with the construction of circuits based on discrete componentry, and their applications in telecommunications, media, and electronics.
World Academy of Science, Engineering and Technology 38 2010 A Numerical Study on Thermal Dissociation of
    Electric Transmission & Distribution
    • Electric Transmission & Distribution
    • 1954
    A . SKROTZKI , . “ Electric Transmission & Distribution . ” 1954 Jersey Central Power and Light Cmpany . [ 6 ] Glen Ballou , " Electrical Engineering HandBook ”
    • Grisby Boca Ratton , . ” Electrical Power Engineering . ”
    • 1999
    Handbook of Electrical Engineering
    • Handbook of Electrical Engineering
    • 2004
    “ Reactive Power Control in Electric Systems ” 1982 by Jihn
    • 1982
    Electrical Transmission and Distribution Reference Book
    • Electrical Transmission and Distribution Reference Book
    F.I.E, Power System for the year 2000 and beyond. “Reactive Power Compensation in Industrial Power Distribution System
    • 2000
    ...
    ...