Design and Analysis of a Leaf Spring for automobile suspension system: A Review
@inproceedings{Baviskar2013DesignAA, title={Design and Analysis of a Leaf Spring for automobile suspension system: A Review}, author={R K Baviskar and Bhamre and Sarode}, year={2013} }
The aim of this review paper is to represent a general study on the design, analysis of leaf spring. The suspension system in a vehicle significantly affects the behavior of vehicle, i.e. vibration characteristics including ride comfort, stability etc. Leaf springs are commonly used in the vehicle suspension system and are subjected to millions of varying stress cycles leading to fatigue failure. A lot of research has been done for improving the performance of leaf spring. Now the automobile…
No Paper Link Available
Figures and Tables from this paper
10 Citations
FATIGUE FAILURE ANALYSIS & VALIDATION OF MONO LEAF SPRING DESIGN
- Engineering
- 2014
INTRODUCTION: Leaf spring is widely used in automotive and one of the components of suspension system. It consists of one or more leaves. As a general rule, the leaf spring must be regarded as a…
Development of mono leaf spring with composite material and investigating its mechanical properties
- Materials Science, Engineering
- 2020
Optimization and Static Stress Analysis of Hybrid Fiber Reinforced Composite Leaf Spring
- Engineering
- 2015
A monofiber reinforced composite leaf spring is proposed as an alternative to the typical steel one as it is characterized by high strength-to-weight ratio. Different reinforcing schemes are…
Stress Analysis of Epoxy carbon fiber composite material for leaf spring by using FEA software
- Engineering
- 2016
All rights reserved by www.ijsrd.com 20 Stress Analysis of Epoxy carbon fiber composite material for leaf spring by using FEA software Prof. N.D. Patil Prof. V.P. Patil Prof. P.P. Awate Assistant…
Application of Design of Experiment (DOE) Method for Optimum Parameters of “Mahindra Bolero” Leaf Spring
- Engineering
- 2017
The Automobile Industry has shown keen interest for replacement of steel leaf spring with that of composite leaf spring, since the composite material has high strength to weight ratio, good corrosion…
Design and Analysis of Optimised Loop Wheel
- Engineering
- 2019
A Loop wheel is a wheel with integral suspension, designed for higher shock-absorbing performance and better comfort, and this spring system between the hub and the rim of the wheel provides suspension that continuously adjusts to uneven terrain cushioning the rider from abnormalities in the road.
Development Of Loop Wheel Reinvents
- Engineering
- 2020
In today’s world, Bicycles are the most favorite choice when it comes to causes like health, pollution, and environment. Several researches have been done in order to make the ride comfortable.…
Model Based Design of a Low Cost and Compliant Low Profile Prosthetic Foot.
- EngineeringJournal of biomechanical engineering
- 2021
The design of a simple and low cost compliant low profile prosthetic foot based on a cantilevered beam of uniform strength that may allow for compliant feet to be developed for individuals with long residual limbs is described.
IJSRD-International Journal for Scientific Research & Development| Vol. 4, Issue 02, 2016 | ISSN (online): 2321-0613
- Computer Science
- 2014
Automated Vehicle Surveillance System is designed to elevate the level of Security in the premises where the system is installed and provides top notch security and tracking measures with transparency.
References
SHOWING 1-10 OF 23 REFERENCES
“Modelling and Analysis of Composite Leaf Spring under the Static Load Condition by using FEA”
- Engineering
- 2011
Leaf springs are one of the oldest suspension components they are still frequently used, especially in commercial vehicles. The past literature survey shows that leaf springs are designed as…
Static analysis and fatigue life prediction of steel and composite leaf spring for light passenger vehicles
- Engineering
- 2007
This paper describes static and fatigue analysis of steel leaf spring and composite multi leaf spring made of glass fibre reinforced polymer. Primary objective is to compare the load carrying…
A Comparative Study of CAE and Experimental Results of Leaf Springs in Automotive Vehicles
- Engineering
- 2011
The work is carried out on the front end leaf spring of a commercial vehicle. The objective of this work is to carry out computer aided design and analysis of a conventional leaf spring, with…
ANALYTICAL AND EXPERIMENTAL STUDIES ON FATIGUE LIFE PREDICTION OF STEEL AND COMPOSITE MULTI-LEAF SPRING FOR LIGHT PASSENGER VEHICLES USING LIFE DATA ANALYSIS
- Engineering
- 2007
This paper describes static and fatigue analysis of steel leaf spring and composite multi leaf spring made up of glass fibre reinforced polymer using life data analysis. The dimensions of an existing…
A stress approach model for predictions of fatigue life by shot peening of EN45A spring steel
- Materials Science
- 2006
Material and Processing Effects on Fatigue Performance of Leaf Springs
- Materials Science
- 1979
Procedures are developed for assessing the influence of various material and processing factors on the fatigue performance of leaf springs. Cyclic material properties, determined from smooth axial…
A Study of Fatigue Data Editing using the Short-Time Fourier Transform (STFT)
- Engineering
- 2009
This study presents the development of the STFT-based fatigue data editing technique that will be used as a tool to accelerate for accelerating fatigue testing. This technique was performed by…