Corpus ID: 139624388

Design, fabrication and evaluation of a hybrid biomanufacturing system for tissue engineering

@inproceedings{Liu2018DesignFA,
  title={Design, fabrication and evaluation of a hybrid biomanufacturing system for tissue engineering},
  author={F. Liu},
  year={2018}
}
  • F. Liu
  • Published 2018
  • Engineering
Plasma-assisted Bio-extrusion System (PBS System) is an innovative hybrid bio-manufacturing system to produce complex multi-material and functionally graded scaffolds combining multiple pressure-assisted and screw-assisted printing heads and plasma jets. This approach, which represents a step forward regarding the current state of the art technology in the field of biomanufacturing, enables to design and fabricate more effective scaffolds matching the mechanical and surface characteristics of… Expand
Experimental and Numerical Simulations of 3D-Printed Polycaprolactone Scaffolds for Bone Tissue Engineering Applications
TLDR
A simulation approach to determine the mechanical behaviour of bone scaffolds allowing the compressive modulus and the deformation mechanisms to be predicted was presented, highlighting the suitability of the simulation tool for the mechanical design of 3D-printed bone scaffolding. Expand

References

SHOWING 1-10 OF 47 REFERENCES
Hybrid Additive Manufacturing System for Zonal Plasma-Treated Scaffolds
Abstract Producing synthetic scaffolds with adequate physical, chemical, and biological properties remains a challenge for tissue engineering. Internal architecture, surface chemistry, and materialExpand
A plasma-assisted bioextrusion system for tissue engineering
Abstract A challenge for tissue engineering is to produce synthetic scaffolds of adequate chemical, physical and biological cues effectively. This paper describes a plasma-assisted bio-extrusionExpand
Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering.
  • Rosa Akbarzadeh, A. Yousefi
  • Materials Science, Medicine
  • Journal of biomedical materials research. Part B, Applied biomaterials
  • 2014
TLDR
The objective of this review is to provide information pertaining to the effect of these parameters on the architecture and properties of the scaffolds fabricated by the TIPS technique. Expand
On the mechanical properties of PLC-bioactive glass scaffolds fabricated via BioExtrusion.
TLDR
The addition of bioglass was found to slightly decrease the initial elastic gradient and the plateau stress of the biomaterial scaffolds, and this material was intended for use in tissue engineering. Expand
Polylactides in additive biomanufacturing.
TLDR
Considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed, and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution are given. Expand
Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds.
TLDR
It is reported for the first time how polycaprolactone (PCL) scaffolds with controlled micro-architecture can be effectively produced via bioextrusion and used to enhance the penetration of plasma deposited species. Expand
3D bioprinting of photocrosslinkable hydrogel constructs
Three-dimensional (3D) bioprinting comprises a group of biofabrication technologies for the additive manufacturing of 3D constructs by precisely printing biocompatible materials, cells andExpand
A functionally gradient variational porosity architecture for hollowed scaffolds fabrication.
TLDR
A novel continuous tool-path planning methodology for hollowed scaffold fabrication in tissue engineering with a significant reduction in design error is presented, and a new functionally gradient porous architecture is proposed. Expand
Production and 3D printing processing of bio-based thermoplastic filament
In this work, an extrusion-based 3D printing technique was employed for processing of biobased blends of Poly(Lactic Acid) (PLA) with low-cost kraft lignin. In Fused Filament Fabrication (FFF) 3DExpand
Laser-based cell printing techniques for additive biomanufacturing
Abstract Additive manufacturing guided by computer-aided technologies has enabled new possibilities in tissue engineering. Laser-based cell printing techniques are at the forefront due to the abilityExpand
...
1
2
3
4
5
...