Design, Simulation and Control of a 100 MW-Class Solid Oxide Fuel Cell Gas Turbine Hybrid System

@inproceedings{Mueller2008DesignSA,
  title={Design, Simulation and Control of a 100 MW-Class Solid Oxide Fuel Cell Gas Turbine Hybrid System},
  author={Fabian Mueller and Brian Tarroja and James D. Maclay and Faryar Jabbari and Jacob Brouwer and Scott Samuelsen},
  year={2008}
}
A 100 MW-class planar solid oxide fuel cell, synchronous gas turbine hybrid system has been designed, modeled and controlled. The system is built of 70 functional fuel cell modules each containing 10 fuel cell stacks, a blower to recirculate depleted cathode air, a depleted fuel oxidizer and a cathode inlet air recuperator with bypass. The recuperator bypass serves to control the cathode inlet air temperature while the variable speed cathode blower recirculates air to control the cathode air… 
Design and Optimization of an Innovative Solid Oxide Fuel Cell–Gas Turbine Hybrid Cycle for Small Scale Distributed Generation
TLDR
The design and optimization of an innovative concept of small scale Solid Oxide Fuel Cell – Gas Turbine hybrid cycle for residential applications, indicating the existence of realistic optimal designs achieving exergy efficiency higher than 66%.
Constrained control and optimization of tubular solid oxide fuel cells for extending cell lifetime
TLDR
The authors have presented the first approach to control the primary two causes of thermally-driven microcracking in tubular SOFCs using constrained control using a constrained MIMO model predictive controller.
Feasibility and design implications of fuel cell power for sealift ships
Abstract : Fuel cell technologies provide clean and efficient power solutions for both stationary and mobile applications. For shipboard applications, most studies published so far have focused on
...
...

References

SHOWING 1-10 OF 48 REFERENCES
Characterization of Air Flow Management and Control in a Fuel Cell Turbine Hybrid Power System Using Hardware Simulation
Air flow management and control in a fuel cell gas turbine hybrid power system is evaluated using the Hybrid Performance (Hyper) hardware simulation facility at the National Energy Technology
Control Design for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System
A bottoming 275 kilowatt planar solid oxide fuel cell (SOFC) gas turbine (GT) hybrid system control approach has been conceptualized and designed. Based on previously published modeling techniques, a
Linear Quadratic Regulator for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System
The control system for fuel cell gas turbine hybrid power plants plays an important role in achieving synergistic operation of subsystems, improving reliability of operation, and reducing frequency
Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results
R. A. Roberts J. Brouwer e-mail: jb@nfcrc.uci.edu National Fuel Cell Research Center, University California, Irvine, Irvine, CA 92697-3550 Dynamic Simulation of a Pressurized 220 kW Solid Oxide
Dynamic simulation of carbonate fuel cell-gas turbine hybrid systems
Hybrid fuel cell/gas turbine systems provide an efficient means of producing electricity from fossil fuels with ultra low emissions. However, there are many significant challenges involved in
...
...