Deposition of ZnO on bismuth species towards a rechargeable Zn-based aqueous battery.
@article{Shin2016DepositionOZ,
title={Deposition of ZnO on bismuth species towards a rechargeable Zn-based aqueous battery.},
author={Jaewook Shin and Jung-Min You and Jungwoo Lee and Rajan Kumar and Lu Yin and Joseph Wang and Y. Shirley Meng},
journal={Physical chemistry chemical physics : PCCP},
year={2016},
volume={18 38},
pages={
26376-26382
}
}Zn aqueous batteries typically suffer from poor cycle life because water soluble zincate ions are formed during the oxidation of Zn. When Zn is oxidized, most of the Zn2+ ions detach from the current collector and become electrochemically inactive, leaving the battery non-rechargeable. Numerous reports demonstrate the use of Bi2O3 as an electrode additive to enhance electrochemical performance and they attribute this phenomenon to the improvement in electrical conductivity. However…
30 Citations
Roadmap on the Protective Strategies of Zinc anodes in Aqueous Electrolyte
- Materials Science, ChemistryEnergy Storage Materials
- 2021
Characterization of a new rechargeable Zn/PVA-KOH/Bi2O3 battery: structural changes of the Bi2O3 electrode
- Materials Science
- 2020
In this study, bismuth oxide is utilized as positive electrode in a rechargeable Zn-based battery using a gel polymer electrolyte. Bi2O3 is reduced to Bi metal during the discharge process of the…
In-situ growth of Co3O4 nanowire-assembled clusters on nickel foam for aqueous rechargeable Zn-Co3O4 and Zn-air batteries
- Materials ScienceApplied Catalysis B: Environmental
- 2019
Integration of Zn-Ag and Zn-Air Batteries: A Hybrid Battery with the Advantages of Both.
- Materials ScienceACS applied materials & interfaces
- 2018
This work brings forth a conceptually novel high-performance battery, and more generally opens up new vistas for developing hybrid electrochemical systems by integrating the advantages from two distinct ones.
Recent progress in MnO2-based oxygen electrocatalysts for rechargeable zinc-air batteries
- Chemistry, Materials Science
- 2021
Intercalation and Conversion Reactions of Nanosized β-MnO2 Cathode in the Secondary Zn/MnO2 Alkaline Battery
- Materials Science
- 2018
This work reports rechargeable Zn/β-MnO2 alkaline batteries as promising stationary energy storage. Unlike commercial alkaline batteries with poor cyclic performance, the nanosized β-MnO2 cathode in…
Revisiting the conversion reaction voltage and the reversibility of the CuF2 electrode in Li-ion batteries
- Materials ScienceNano Research
- 2017
Deviation between thermodynamic and experimental voltages is one of the key issues in Li-ion conversion-type electrode materials; the factor that affects this phenomenon has not been understood well…
Challenges and strategies of zinc anode for aqueous zinc-ion batteries
- Materials Science
- 2021
Poor safety and limited lithium resources have caused concerns for the future development of lithium-ion batteries (LIBs), which are applied in many fields in our daily life. Aqueous zinc-ion…
Electronic and Ionic Conductivities Enhancement of Zinc Anode for Flexible Printed Zinc-Air Battery
- Materials Science
- 2018
Zinc-air batteries are considered promising energy storage devices for future energy applications due to their high energy density, safety, and low cost. However, poor battery performance and low…
References
SHOWING 1-10 OF 73 REFERENCES
Influence of ZnO precipitation on the cycling stability of rechargeable Zn–air batteries
- Materials ScienceJournal of Applied Electrochemistry
- 2015
In this work, the effect of ZnO precipitation on the electrochemical cycling stability of Zn–air batteries was systematically investigated. The results suggest that sustained electrical…
In situ X-ray diffraction investigation of zinc based electrode in Ni–Zn secondary batteries
- Materials Science
- 2013
Rechargeable Zn/PEDOT Battery with an Imidazolium‐Based Ionic Liquid as the Electrolyte
- Materials Science
- 2015
A non-aqueous secondary battery has been constructed by using Zn metal as the anode and chemically synthesised PEDOT as the cathode, with a 1-ethyl-3-methylimidazolium dicyanamide ionic liquid as the…
Dendrite-Free Nanocrystalline Zinc Electrodeposition from an Ionic Liquid Containing Nickel Triflate for Rechargeable Zn-Based Batteries.
- Materials ScienceAngewandte Chemie
- 2016
It is shown that the nanocrystalline Zn exhibits a high cycling stability even after 50 deposition/stripping cycles and this strategy of introducing an inorganic metal salt in ionic liquid electrolytes can be considered as an efficient way to obtain dendrite-free zinc.
Improvement in self-discharge of Zn anode by applying surface modification for Zn–air batteries with high energy density
- Materials Science
- 2013
Effect of adding various carbon additives to porous zinc anode in rechargeable hybrid aqueous battery
- Materials Science
- 2016
The electrochemistry of metal oxide additives in pasted zinc electrodes
- Materials Science, Chemistry
- 1981
The Anodic Behavior of Planar and Porous Zinc Electrodes in Alkaline Electrolyte
- Materials Science
- 2010
The electrochemical performance of planar and porous zinc electrodes in an actual Zn/ MnO 2 battery using lithium hydroxide (LiOH) electrolyte has been investigated. A large discharge capacity of 220…





