Denver Water's Assessment of Interior Polyurethane Coating of 108-inch Water Pipeline

@inproceedings{Bambei2011DenverWA,
  title={Denver Water's Assessment of Interior Polyurethane Coating of 108-inch Water Pipeline},
  author={John H. Bambei and Neal Kelemen and Richard D. Mielke},
  year={2011}
}
Fast set, high solids polyurethane has been used as a coating for the interior and exterior of steel water transmission pipelines since the late 1980s, but it wasn’t until 1999 that the American Water Works Association (AWWA) approved Standard C222 for polyurethane coating of steel pipe and fittings. Over the course of the following decade, the coating system gained wide acceptance for water transmission pipelines among many major water utilities. In 1997, Denver Water installed 8,090 lineal… Expand
3 Citations

Figures and Tables from this paper

References

SHOWING 1-10 OF 10 REFERENCES
SSPC-SP 10/Nace No
  • 2, Near-White Blast Cleaning,” SSPC: The Society for Protective Coatings, Pittsburg, PA.
  • 2007
SSPC-SP 10/Nace No. 2, Near-White Blast Cleaning
  • 2007
Standard Terminology for Paint
  • Related Coatings, Materials, and Applications
  • 2010
Standard Test Method for Pull-Off Strength for Coatings Using Portable Adhesion Tester
  • 2009
Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
  • AWWA
  • 2008
Denver Water Board: Two Year Inspection Shows Amazing Results" Madison Case History 001
  • 2000
Tape Coating Systems for the Exterior of Steel Water Pipelines
  • AWWA
  • 1995
Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
  • AWWA C210-92
  • 1992
Steel Water Pipe-6 In
  • (150mm) and Larger,” AWWA C200-91, American Water Works Association, Denver, CO.
  • 1991
Steel Water Pipe-6 In. (150mm) and Larger
  • AWWA
  • 1991