Corpus ID: 136646081

DEFORMATION AND DAMAGE MECHANISMS IN SELECTED 2000 SERIES ALUMINUM ALLOYS UNDER BOTH QUASI-STATIC AND DYNAMIC IMPACT LOADING CONDITIONS

@inproceedings{Tiamiyu2015DEFORMATIONAD,
  title={DEFORMATION AND DAMAGE MECHANISMS IN SELECTED 2000 SERIES ALUMINUM ALLOYS UNDER BOTH QUASI-STATIC AND DYNAMIC IMPACT LOADING CONDITIONS},
  author={A. Tiamiyu},
  year={2015}
}
.......................................................................................................ii Acknowledgment.............................................................................................iv Dedication.......................................................................................................v Table of 
1 Citations
Dynamic impact response and corrosion behavior of coarse- and ultrafine-grained AISI 321 austenitic stainless steel
.......................................................................................................iiExpand

References

SHOWING 1-10 OF 166 REFERENCES
Hot deformation behaviour of aluminium alloy 6061/SiCp MMCs made by powder metallurgy route
Abstract The hot deformation behaviour of a 20 vol.-%SiC particle reinforced Al alloy 6061 composite and Al alloy 6061, made via a powder metallurgy (PM) route and treated by a T4 temper, wereExpand
Influence of specimen geometry on adiabatic shear instability of tungsten heavy alloys
Finite element simulations are carried out for the deformation and instability of truncated-conic tungsten heavy-alloy specimens subjected to impact loading. A two-dimensional axis-symmetricExpand
The dynamic and quasi-static mechanical response of three aluminum armor alloys: 5059, 5083 and 7039
Abstract The mechanical response and microstructural evolution of aluminum alloys 5083, 5059 and 7039 was examined in compression and shear in both the quasi-static (0.001 s −1 ) and dynamic (≈2000 sExpand
Study of hot deformation of an Al–Cu–Mg alloy using processing maps and microstructural characterization
Abstract The forming behaviour of an Al–Cu–Mg alloy (Al 2024-T351) has been studied by processing maps and microstructural characterization. Torsion tests were conducted in the range 278–467 °C,Expand
Influence of deformation path on the strain hardening behavior and microstructure evolution in low SFE FCC metals
Abstract Following our recent studies of the influence of mechanical twinning on the strain hardening of low SFE FCC metals deformed by simple compression, the investigation was extended to twoExpand
Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading
Abstract Microstructural aspects of the deformation and failure of AA 6061 and AA 2099 aluminum alloys under dynamic impact loading are investigated and compared with their responses to quasi-staticExpand
The effects of aging treatment and strain rates on damage evolution in AA 6061 aluminum alloy in compression
Abstract AA 6061 aluminum alloy in T4, T6 and T8 temper were subjected to quasi-static compressive loading at a strain-rate of 3.2 × 10−3 s−1 and dynamic compressive loading at strain-rates betweenExpand
On the measurement of local strain and temperature during the formation of adiabatic shear bands
Abstract A series of experiments was performed to study the process of adiabatic shear band initiation and formation in steels. The steels include a low carbon cold-rolled steel and three martensiticExpand
Strain rate sensitivity and strain hardening exponent during the isothermal compression of Ti60 alloy
Abstract In this paper, the flow stress was investigated in detail during the isothermal compression of Ti60 alloy. The strain rate sensitivity and the strain hardening exponent of Ti60 alloy wereExpand
Shear localization and recrystallization in dynamic deformation of 8090 Al-Li alloy
The microstructural evolution in localized shear deformation was investigated in an 8090 Al-Li alloy by split Hopkinson pressure bar (strain rate of approximately 10(3) s(-1)) at ambient temperatureExpand
...
1
2
3
4
5
...