Corpus ID: 136461051

Cyclic fatigue damage characteristics observed for simple loadings extended to multiaxial life prediction

@inproceedings{Jones1988CyclicFD,
  title={Cyclic fatigue damage characteristics observed for simple loadings extended to multiaxial life prediction},
  author={David J. Jones and P. Kurath},
  year={1988}
}
Fully reversed uniaxial strain controlled fatigue tests were performed on smooth cylindrical specimens made of 304 stainless steel. Fatigue life data and cracking observations for uniaxial tests were compared with life data and cracking behavior observed in fully reversed torsional tests. It was determined that the product of maximum principle strain amplitude and maximum principle stress provided the best correlation of fatigue lives for these two loading conditions. Implementation of this… Expand
The relationship between observed fatigue damage and life estimation models
Observations of the surface of laboratory specimens subjected to axial and torsional fatigue loadings has resulted in the identification of three damage fatigue phenomena: crack nucleation, shearExpand
Fatigue damage prediction in multiaxial loading using a new energy-based parameter
Abstract A new approach for the definition of the critical plane and a new energy-based multiaxial fatigue parameter are proposed in this work. The normal strain energy and shear strain energy on twoExpand
In-phase and out-of-phase axial-torsional fatigue behavior of Haynes 188 at 760 C
Isothermal, in-phase and out-of-phase axial-torsional fatigue experiments have been conducted at 760 C on uniform gage section, thin-walled tubular specimens of a wrought cobalt-base superalloy,Expand
Modelling multiaxial fatigue with a new combination of critical plane definition and energy-based criterion
Abstract A new multiaxial fatigue criterion is proposed that takes into account the influence of material properties and loading conditions on the direction of the critical fatigue plane. Poisson’sExpand
DESIGN OPTIMIZATION OF HEADBAND FOR HEADPHONE By JASON LIN A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Mechanical Engineering
by Jason Lin, M.S. Washington State University December 2009 Chair: Dae-Wook (Dave) Kim There is an ever increasing demand for improvement of performance, reliability and cost effectiveness ofExpand
DESIGN OPTIMIZATION OF HEADBAND FOR HEADPHONE

References

SHOWING 1-10 OF 38 REFERENCES
Crack Initiation Under Low-Cycle Multiaxial Fatigue in Type 316L Stainless Steel
Low-cycle fatigue tests corresponding to fatigue life range between 103 and 105 cycles were carried out at room temperature on one heat of 316 L austenitic stainless steel. These tests included: (i)Expand
Observations of cracking behavior in tension and torsion low cycle fatigue
A series of tension and torsion low-cycle fatigue tests were conducted on several engineering materials. Detailed observations of nucleation and early crack growth were made. Cracking behavior isExpand
Mean Stress Effects in Biaxial Fatigue of Inconel 718
Biaxial fatigue tests were conducted on Inconel 718 thin-walled tubular specimens to quantify the effect of mean stress. The specimens were loaded in combined tension and torsion in strain control atExpand
Crack Growth During Low-Cycle Fatigue of Smooth Axial Specimens
Crack growth data are reported for small axially loaded smooth specimens of A533B steel subjected to strain cycling fatigue at large plastic strains. Surface crack lengths were monitored usingExpand
A Theory for Fatigue Failure under Multiaxial Stress-Strain Conditions
A new theory for multiaxial fatigue is presented that is based on a physical interpretation of the mechanisms of fatigue crack growth. It may be represented graphically by contours of constant life,Expand
The Influence of State of Stress on Low-Cycle Fatigue of Structural Materials. A Literature Survey and Interpretive Report
A literature survey was made on the influence of state of stress on the deformation and fracture behavior during low-cycle fatigue. Only the phenomenological aspects of fracture and deformation inExpand
A Nonarbitrary Fatigue Crack Size Concept to Predict Total Fatigue Lives
Abstract : A method combining strain cycle fatigue and fracture mechanics concepts to predict a nonarbitrary crack initiation size, ai, is presented. The nonarbitrary crack size is used as aExpand
Fatigue damage and crack growth in aluminium alloys
Abstract This paper presents evidence for microstructural changes that can occur in aluminium alloys when subjected to fatigue stress. These changes represent fatigue induced damage, and take theExpand
Behavior of materials under conditions of thermal stress
A review is presented of available information on the behavior of brittle and ductile materials under conditions of thermal stress and thermal shock. For brittle materials, a simple formula relatingExpand
Multiaxial Fatigue: A Survey of the State of the Art
This paper surveys the current state of knowledge concerning multiaxial fatigue. Developments are presented in chronological order and are discussed so as to supplement existing reviews in thisExpand
...
1
2
3
4
...