Correlation between Young's modulus and porosity in porous materials

@article{Kovik1999CorrelationBY,
  title={Correlation between Young's modulus and porosity in porous materials},
  author={Jaroslav Kov{\'a}{\vc}ik},
  journal={Journal of Materials Science Letters},
  year={1999},
  volume={18},
  pages={1007-1010}
}
  • J. Kováčik
  • Published 1999
  • Materials Science
  • Journal of Materials Science Letters
where E is the effective Young’s modulus of porous material with porosity p, E0 is Young’s modulus of solid material, pc is the porosity at which the effective Young’s modulus becomes zero and f is the parameter dependent on the grain morphology and pore geometry of porous material [1]. As was noted by Wagh et al. [2], fittings of the experimental data to Equation 1 often give pc= 1 [1, 3] and do not explain the data accurately. In recent experimental works, either pc≡ 1 is preferably used [4–6… Expand
On Correlating Elastic Properties of the Porous Structure to Pore Attributes
The correlation between the stiffness and porosity of the porous material is studied for many decades. In most cases the goal was to propose an equation correlating the fractional change in elasticExpand
Applicability of Common Young’s Modulus-Porosity Models to Highly Porous 3D Printed Stoneware Ceramic
Purpose: This paper explores the relationship between Young’s modulus and porosity in stoneware ceramic parts fabricated by means of three-dimensional printing (3DP) and post-processed via kilnExpand
Correlation between Shear Wave Velocity and Porosity in Porous Solids and Rocks
The shear wave velocity dependence on porosity was modelled using percolation theory model for the shear modulus porosity dependence. The obtained model is not a power law dependence (no simpleExpand
Correlation Between Elastic Modulus, Shear Modulus, Poisson's Ratio and Porosity in Porous Materials†
Prediction of porous materials mechanical properties is crucial for their industrial applications. Now numerical models containing some errors or analytical semi-empirical models are used.Expand
"Apparent" Young's elastic modulus and radial recovery for some tableted pharmaceutical excipients.
  • K. Kachrimanis, S. Malamataris
  • Chemistry, Medicine
  • European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences
  • 2004
TLDR
A simple linear equation is proposed for prediction of Young's modulus, E, from %RR, at least in the porosity range between 0.1 and 0.3 (representative of commercial pharmaceutical tablets), but use of %RR instead to E is applicable only under many limitations. Expand
Influence of the Total Porosity on the Properties of Sintered Materials—A Review
Porosity is a characteristic present in most sintered materials, full densification only being achieved in special cases. For some sintered materials, porosity is indeed a desired characteristic,Expand
Fracture toughness, hardness, and Young’s modulus of tantalum nanocrystalline films
The fracture toughness, hardness, and Young's modulus of tantalum thin films are investigated based on nanoindentation measurements. A lower estimate of the fracture toughness of a 100 nm tantalumExpand
A semi-empirical relation between static and dynamic elastic modulus
Abstract Researchers have long investigated the difference between static and dynamic Young's modulus in terms of values and application. In field experiences, dynamic Young's modulus can often beExpand
An implicit constitutive relation for describing the small strain response of porous elastic solids whose material moduli are dependent on the density
In this short note, we develop a constitutive relation that is linear in both the Cauchy stress and the linearized strain, by linearizing implicit constitutive relations between the stress and theExpand
Computational characterization of the structural and mechanical properties of nanoporous titania
Nanoporous titania is one of the most commonly used biomaterials with good biocompatibility and mechanical strength.
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 13 REFERENCES
Young's modulus of porous brittle solids
A new equationE =E0 (1 −aP)n whereE andE0 are the Young's moduli at porosity,P, and zero, respectively, a andn are material constants, has been derived semi-empirically for describing the porosityExpand
Open pore description of mechanical properties of ceramics
A dependence of Young's modulus of elasticity on open porosity in ceramics is derived from an open-porosity model, which in the literature, is applied to salinity conductivity and fluid permeabilityExpand
Ultrasonic evaluation of elastic parameters of sintered powder compacts
The variation of elastic moduli, M, of sintered powder compacts with porosity, p, has been analysed in terms of an equation M = M0 (1−p)n, where M0 is the elastic modulus of non-porous material and nExpand
Mechanical Properties of Partially Dense Alumina Produced from Powder Compacts
The elastic modulus (E), the critical strain energy release rate (G[sub c]), and the flexural strength ([sigma]) have been determined for two partially dense alumina bodies produced from the sameExpand
Aluminium foam—modulus of elasticity and electrical conductivity according to percolation theory
Aluminium foam is an isotropic, highly porous aluminium in which the pores create a cellular structure. Industrial exploitation of this remarkable material will be determined by the possibility ofExpand
Young's modulus of porous materials
A relationship between porosity and Young's modulus is obtained theoretically for porous materials made by powder metallurgy. The relationship is applicable to the entire range of porosity and isExpand
Nondestructive evaluation of elastic parameters of sintered iron powder compacts
A systematic study of the variation of elastic moduli and Poisson's ratio of sintered iron compacts of porosity (up to 21.6%) has been carried out by measuring longitudinal and shear ultrasonicExpand
Measurement of the dynamic elastic moduli of porous titanium aluminide compacts
The dynamic elastic moduli of the porous alpha-two titanium aluminide compacts are measured using an ultrasonic technique. Both shear and longitudinal velocities are measured for compacts ofExpand
Microstructure and mechanical properties of sintered glass
Glass microspheres have been sintered under argon in order to obtain sintered brittle bodies over a large range of density. During sintering, the microstructure evolves from a stacking of spheres toExpand
Applications of percolation theory
Connectivity as the Essential Physics of Disordered Systems Elements of Percolation Theory Characterization of Porous Media Earthquakes, and Fracture and Fault in Patterns in Heterogeneous RockExpand
...
1
2
...