Continuous atomic displacements and lattice distortion during fcc–bcc martensitic transformation

@article{Cayron2015ContinuousAD,
  title={Continuous atomic displacements and lattice distortion during fcc–bcc martensitic transformation},
  author={Cyril Cayron},
  journal={Acta Materialia},
  year={2015},
  volume={96},
  pages={189-202}
}
  • C. Cayron
  • Published 1 September 2015
  • Materials Science
  • Acta Materialia
Angular distortive matrices of phase transitions in the fcc–bcc–hcp system
Shifting the Shear Paradigm in the Crystallographic Models of Displacive Transformations in Metals and Alloys
Deformation twinning and martensitic transformations are characterized by the collective displacements of atoms, an orientation relationship, and specific morphologies. The current crystallographic
Hard-sphere displacive model of extension twinning in magnesium
Dislocation Induced FCC Twins at the HCP/FCC Interfaces in a Deformed Ti-5Al Alloy: Experiments and Simulations
This paper proposes a new formation route for the face-centered cubic (FCC) twins at the hexagonal close-packed (HCP)/FCC interface in a deformed Ti-5at.%Al alloy. From the experimental results, an
Correlation of orientation relationships and strain-induced martensitic transformation sequences in a gradient austenitic stainless steel
Orientation relationships (ORs) play a crucial role in the phase transformation of face-centered cubic austenite (γ-fcc) to body-centered cubic martensite (α′-bcc) upon plastic deformation. So far,
Unifying Description of the Martensitic Phase Transformation From the Minimization of Atomic Displacements
We present a unifying description for the martensitic transformation of steel that explains all of the important experimentally observed features. It is obtained through a geometric minimization of
Over the shear paradigm
Deformation twinning and martensitic transformations are displacive transformations; they are defined by high speed collective displacements of the atoms, the existence of a parent/daughter
The transformation matrices (distortion, orientation, correspondence), their continuous forms and their variants.
  • C. Cayron
  • Mathematics
    Acta crystallographica. Section A, Foundations and advances
  • 2019
TLDR
The crystallography of displacive/martensitic phase transformations can be described with three types of matrix: the lattice distortion matrix, the orientation relationship matrix and the correspondence matrix, and an explanation is offered of how to deduce the matrices of inverse transformation.
Sphere packings as a tool for the description of martensitic phase transformations.
  • H. Sowa
  • Materials Science
    Acta crystallographica. Section A, Foundations and advances
  • 2017
TLDR
Martensitic transformations which play an important role in metallurgical processes are analysed using group-subgroup relations and sphere-packing considerations and yields the orientation relations according to the Nishiyama-Wassermann, the Kurdjumov-Sachs and the Pitsch mechanisms.
...
1
2
3
4
...

References

SHOWING 1-10 OF 38 REFERENCES
One-step model of the face-centred-cubic to body-centred-cubic martensitic transformation
A `one-step' theory based on Pitsch distortion is proposed to explain the continuity between the orientations of the Kurdjumov–Sachs (KS), Nishiyama–Wassermann (NW) and Pitsch variants observed on
The invariant line and precipitate morphology in Fcc-Bcc systems
Second-phase precipitates in many face-centered cubic-body-centered cubic (fcc-bcc) systems(e.g., Ni-Cr, Cu-Cr, Fe-Cu, and α-γ stainless steels) have a lath-shaped morphology, the long axis of the
The martensite transformation in thin foils of iron-nitrogen alloys
Abstract The martensite transformation in thin foils of an iron-nitrogen alloy has been investigated. Under these particular experimental conditions the martensite consists of very thin fibre
Atomic displacements in the austenite–martensite transformation
The atomic displacements in the transformation from austenite to martensite are described, and the strains involved are derived. It is shown that the tetragonality of martensite arises as a necessary
...
1
2
3
4
...