Connecting physical properties of spin-casting solvents with morphology, nanoscale charge transport, and device performance of poly(3-hexylthiophene):phenyl- C61-butyric acid methyl ester bulk heterojunction solar cells

Pavel Dutta, Yu Xie, +6 authors Venkat Bommisettya
Published 2017

Abstract

The correlation between the physical properties of spin-casting solvents, film morphology, nanoscale charge transport, and device performance was studied in poly(3hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) blends, spin cast with two halogenated aromatic solvents: chlorobenzene (CB) and ortho-dichlorobenzene (1,2-DCB). 1,2-DCB–based… (More)

Topics

12 Figures and Tables

Cited By

Wangyao Ge's Dissertation

Adrienne D. Stiff-Roberts
2016

References

Sort by:

Showing 1-10 of 46 references

Femtosecond Time-Resolved Fluorescence Study of P3HT/PCBM Blend Films

Yu Xie, Yong Li, +6 authors Xingzhong Yan
2012

Dithienogermole as a fused electron donor in bulk heterojunction solar cells.

Chad M Amb, Song Chen, +4 authors John R Reynolds
Journal of the American Chemical Society
2011

L. F. Drummy, R. J. Davis, D. L. Moore, M. Durstock, R. A. Vaia, J.W.P. Hsu
Chem. Mater
2011

M. Siddiki, J. Li, D. Galipeau, Q. Qiao
Energy Environ. Sci
2010

J. Subbiah, K. R. Choudhury, S. Ellinger, J. R. Reynolds, F. So, “Color tunable π -conjugated polymers for solar-cell applications
Sel. Top. Quantum Electron. 16, 1792–1800
2010

X. Wang, D. Zhang, K. Braun, H. Egelhaaf, C. J. Brabec, A. J. Meixner
Adv. Funct. Mater
2010

Multi-source/component spray coating for polymer solar cells.

Li-Min Chen, Ziruo Hong, +5 authors Yang Yang
ACS nano
2010

Polymer nanowire/fullerene bulk heterojunction solar cells: how nanostructure determines photovoltaic properties.

Hao Xin, Obadiah G Reid, Guoqiang Ren, Felix Sunjoo Kim, David S Ginger, Samson A Jenekhe
ACS nano
2010

Probing material properties of polymeric surface layers with tapping mode AFM: which cantilever spring constant, tapping amplitude and amplitude set point gives good image contrast and minimal surface damage?

Esben Thormann, Torbjörn Pettersson, John Kettle, Per M Claesson
Ultramicroscopy
2010

K. Kawano, J. Sakai, M. Yahiroa, C. Adachi
Sol. Energy Mater. Sol. Cells
2009

Connecting physical properties of spin-casting solvents with morphology, nanoscale charge transport, and device performance of poly(3-hexylthiophene):phenyl- C61-butyric acid methyl ester bulk heterojunction solar cells

Abstract

Topics

12 Figures and Tables

Cited By

Wangyao Ge's Dissertation

References

Femtosecond Time-Resolved Fluorescence Study of P3HT/PCBM Blend Films

Dithienogermole as a fused electron donor in bulk heterojunction solar cells.

Molecular-scale and nanoscale morphology of P3HT:PCBM bulk heterojunctions: Energyfiltered TEM and low-dose HREM,

A review on polymer multijunction solar cell,

Engineering of bandgap, interface, and charge transport properties,” IEEE J

Highresolution spectroscopic mapping of the chemical contrast from nanometer domains in P3HT:PCBM organic blend films for solar-cell applications,

Multi-source/component spray coating for polymer solar cells.

Polymer nanowire/fullerene bulk heterojunction solar cells: how nanostructure determines photovoltaic properties.

Probing material properties of polymeric surface layers with tapping mode AFM: which cantilever spring constant, tapping amplitude and amplitude set point gives good image contrast and minimal surface damage?

Effect of solvent on fabrication of active layers in organic solar cells based on poly (3-hexylthiophene) and fullerene derivatives,

Slides referencing similar topics

Connecting physical properties of spin-casting solvents with morphology, nanoscale charge transport, and device performance of poly(3-hexylthiophene):phenyl- C61-butyric acid methyl ester bulk heterojunction solar cells

Abstract

Topics

12 Figures and Tables

Cited By

Wangyao Ge's Dissertation

References

Femtosecond Time-Resolved Fluorescence Study of P3HT/PCBM Blend Films

Dithienogermole as a fused electron donor in bulk heterojunction solar cells.

Molecular-scale and nanoscale morphology of P3HT:PCBM bulk heterojunctions: Energyfiltered TEM and low-dose HREM,

A review on polymer multijunction solar cell,

Engineering of bandgap, interface, and charge transport properties,” IEEE J

Highresolution spectroscopic mapping of the chemical contrast from nanometer domains in P3HT:PCBM organic blend films for solar-cell applications,

Multi-source/component spray coating for polymer solar cells.

Polymer nanowire/fullerene bulk heterojunction solar cells: how nanostructure determines photovoltaic properties.

Probing material properties of polymeric surface layers with tapping mode AFM: which cantilever spring constant, tapping amplitude and amplitude set point gives good image contrast and minimal surface damage?

Effect of solvent on fabrication of active layers in organic solar cells based on poly (3-hexylthiophene) and fullerene derivatives,

Similar Papers

Slides referencing similar topics