Corpus ID: 40567305

Compressive Strengths of Concrete Formulated with Algerian Local Materials

@article{Hacene2009CompressiveSO,
  title={Compressive Strengths of Concrete Formulated with Algerian Local Materials},
  author={Sidi mohammed el amine Boukli Hacene and Fouad Ghomari and A. Khelidj},
  journal={Jordan Journal of Civil Engineering},
  year={2009},
  volume={3}
}
In the developed countries, concrete undergoes not only an improvement of its performance in both fresh and hardened states, but also a good control of the quality of its components. This is not the case in most of the building sites in our country. The factors affecting the quality of concrete during its production and implementation are numerous. Due to this fact, we aim to study the influence of the nature of the components on the mechanical property of the mixture, in particular the… Expand
Influence of limestone fillers and natural pozzolan on engineering properties of concrete
Abstract The resonant frequency method is a non-destructive testing (NDT) technique for assessing building materials. It has been used to determine the dynamic properties of concrete; these are usedExpand
Influence of the Supplementary Cementitious Materials on the Dynamic Properties of Concrete
The resonance frequency method is one of many non-destructive tests which allow us to evaluate construction materials. It was used to determine the dynamic properties of concrete, required inExpand
Concrete Formulation Study for Informal and Semi-Informal Construction Sectors
The present work consisted in carrying out a study on the effective formulation of concrete for an optimal resistance to compression (fc28) between 20 and 30 MPa for the sites animated by the actorsExpand
Effects of Multiple Supplementary Cementitious Materials on Workability and Strength of Lightweight Aggregate Concrete
The use of supplementary cementitious materials (SCMs) in concrete has increased worldwide because of their economic and environmental benefits. Supplementary cementitious materials include silicaExpand
Predicting compressive strength of geopolymer concrete using NDT techniques
The present investigation is mainly focused on predicting compressive strength of geopolymer concrete (GPC) using non-destructive testing (NDT) techniques viz., Schmidt rebound hammer (SRH),Expand
Influence of silica fume on the dynamic properties of concrete
Ultrasonic pulse velocity and resonance frequency methods are non-destructive tests that allow the evaluation and control of building materials. They have been used to determine the dynamicExpand
Probabilistic Modelling of Compressive Strength of Concrete Using Response Surface Methodology and Neural Networks
In this paper, we aim to achieve a probabilistic modelling of the compressive strength of concrete using three response surface models (RSM) and the artificial neural network (ANN) method. The inputExpand
La carbonatation des bétons aux fortes additions calcaires
RESUME : La carbonatation est un phenomene de vieillissement naturel qui concerne tous les betons. Une de ses principales consequences est de favoriser la corrosion des armatures en les depassivant.Expand

References

SHOWING 1-10 OF 20 REFERENCES
THE COMPOSITION OF FRESH CONCRETE FROM THE LABORATORY TO THE SITE
A method is presented for the limited forecast of the behaviour of concrete valid for certain compositions and working procedures. This forecast range is valid for fresh concrete when the finesExpand
The influence of aggregate on the compressive strength of normal and high-strength concrete
This paper presents a comprehensive theory describing the influence of aggregate on the compressive strength of concrete. A first distinction is made between topological and mechanical aspects. TheExpand
ANALYSIS OF THE CONCRETE STRENGTH VERSUS WATER CEMENT RATIO RELATIONSHIP
The Abrams rule implies that only the quality of the cement paste controls the strengths of comparable concretes; the paste quantity does not matter. Analysis of a variety of experimental data showsExpand
Autogenous deformations of cement pastes: Part II. W/C effects, micro–macro correlations, and threshold values
A broad experimental study has been performed, from the end of mixing up to 2 years, on a set of plain cement pastes prepared with the same type I ordinary portland cement (OPC) and variousExpand
Autogenous deformations of cement pastes: Part I. Temperature effects at early age and micro–macro correlations
A micro–macro experimental study has been performed, from the end of mixing up to 2 years, on a set of plain cement pastes prepared with the same type I ordinary Portland cement (OPC) and variousExpand
Properties of Concrete
Since its publication in 1963, Properties of Concrete has been internationally acclaimed as the definitive work of reference on the subject. The fourth edition has been completely rewritten andExpand
Cement-saturation and its effects on the compressive strength and stiffness of concrete
Abstract Phase relationships in hardened cement paste and their influence on strength and stiffness of concrete are considered. The concept of cement-saturation is defined and it is shown thatExpand
Statistical data processing in clinical proteomics
Disclaimer/Complaints regulations If you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the Library know, stating your reasons.Expand
New guide of the concrete and its components
  • Editions Eyrolles, Paris (in French).
  • 1995
Experimental study of the installation of the freshly-mixed concrete
  • Research report of LCPC N° 37, Paris, June (in French).
  • 1974
...
1
2
...