Composites of nanofibrillated cellulose with clay minerals: A review.

@article{Alves2019CompositesON,
  title={Composites of nanofibrillated cellulose with clay minerals: A review.},
  author={Lu{\'i}s Alves and Eduardo Ferraz and Jos{\'e} A. F. Gamelas},
  journal={Advances in colloid and interface science},
  year={2019},
  volume={272},
  pages={
          101994
        }
}

Composite Films of Nanofibrillated Cellulose with Sepiolite: Effect of Preparation Strategy

Cellulose nanofibrils (CNFs) are nanomaterials with promising properties to be used in food packaging and printed electronics, thus being logical substitutes to petroleum-based polymers, specifically

Mechanical and structural properties of environmental green composites based on functionalized bacterial cellulose

In this work TiO2 and highly inorganic ceramic clay were successfully immobilized into Bacterial Cellulose (BC), produced by Komagataeibacter xylinus K2G30 (UMCC 2756) strain, in different

Improved Process to Obtain Nanofibrillated Cellulose (CNF) Reinforced Starch Films with Upgraded Mechanical Properties and Barrier Character

An improved procedure to optimize the dispersability of CNF in a thermoplastic starch was put forward, and the hydrolytic susceptibility of the composite was confirmed, being similar to that of the thermoplastics starch.

Preparation of Printable and Biodegradable Cellulose-Laponite Composite for Electronic Device Application

Printable and biodegradable printed circuit boards (PCBs) prepared by using cellulose as the continuous matrix, laponite as flame retardant filler with various weight ratio (0, 5, 10 and 20 wt% with

Characterization and properties of hybrid foams from nanocellulose and kaolin-microfibrillated cellulose composite

A preliminary comparative study between the four tested formulations was conducted to assess the feasibility of the foam as an adsorbent of methylene blue dye and the structure-properties relationship of four foam formulations prepared from combinations of cellulose nanofibrils, CNF, CNC, and kaolin-microfibrillated cellulose composite.

Cellulose Nanofiber-Based Nanocomposite Films Reinforced with Zinc Oxide Nanorods and Grapefruit Seed Extract

The fabrication and characterization of cellulose nanofiber-based nanocomposite films reinforced with zinc oxide nanorods and grapefruit seed extract are reported, which exhibit effective antimicrobial and antioxidant actions.

Evaluation of Different Methods for Cultivating Gluconacetobacter hansenii for Bacterial Cellulose and Montmorillonite Biocomposite Production: Wound-Dressing Applications

Investigation of the production of BC by Gluconacetobacter hansenii ATCC 23769 using different carbon sources shows that bacteria presented higher BC yields in media with higher glucose concentrations after a 14-day incubation period, and the incorporation of MMT significantly improved the mechanical and thermal properties of the BC membranes.

References

SHOWING 1-10 OF 136 REFERENCES

Nanoporous kaolin—cellulose nanofibril composites for printed electronics

Cellulose nano- and microfibrils (CNF/CMF) grades vary significantly based on the raw materials and process treatments used. In this study four different CNF/CMF grades were combined with kaolin clay

Microfibrillated cellulose and new nanocomposite materials: a review

Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as

Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review

This review article was prompted by a remarkable growth in the number of scientific publications dealing with the use of nanocellulose (especially nanofibrillated cellulose (NFC), cellulose

Comparison of nano- and microfibrillated cellulose films

Nanocellulose is an interesting building block for functional materials and has gained considerable interest due to its mechanical robustness, large surface area and biodegradability. It can be

Polysaccharide based bionanocomposites, properties and applications: A review.

Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material – A review

Today, there is widespread scientific and commercial interest in cellulose nanofibrils (CNF). The exploration of new manufacturing methods and pretreatments has enabled a less energy intensive

American Process: Production of Low Cost Nanocellulose for Renewable, Advanced Materials Applications

Nanocellulose has proven to be a versatile material with a vast array of potential commercial applications including composites and foams for automotive , aerospace , and building construction ,
...