Comparison of proton exchange membrane fuel cell static models

@article{Saadi2013ComparisonOP,
  title={Comparison of proton exchange membrane fuel cell static models},
  author={A. Saadi and Mohamed Becherif and Abdennacer Aboubou and Mohamed Yacine Ayad},
  journal={Renewable Energy},
  year={2013},
  volume={56},
  pages={64-71}
}
Using experimental study results, this paper aims at evaluating the different analytical models that are used for modeling Proton Exchange Membrane Fuel Cell Stack (PEMFC). Three static models such as those of Amphlett, Larminie–Dicks and Chamberlin–Kim are demonstrated. These models are studied and validated experimentally with identification of their parameters separately. Hence, experimental results are compared for fuel cell test bench for two rated powers (400 W and 700 W). Furthermore… Expand
Parametric analysis of the steady state and dynamic performance of proton exchange membrane fuel cell models
Proton exchange membrane fuel cells (PEMFCs) are devices that attract the interest for a variety of applications including portable devices, transportation and stationary power. Several models areExpand
Dynamic modeling and experimental analysis of PEMFCs: A comparative study
TLDR
The characteristics of cell polarization V–I curves are studied for three different dynamic models (Dicks, impedance and electrical equivalent circuit) using MATLAB-Simulink™ to provide an adequate evaluation of each model under different load conditions. Expand
A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems
Abstract An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H2 consumptions corresponding to generated powerExpand
A lumped fluidic model of an anode chamber for fault tolerant strategy design
Water management in Proton Exchange Membrane (PEM) fuel cell systems is a critical point. This article will widely explain the importance of anode exhaust gas management for fuel cell and the issuesExpand
Control-Oriented Mathematical Modeling of Humidity in PEM Fuel Cells
Fuel cell technology is a promising renewable energy for a wide range of applications. Among various types, the PEM (Proton Exchange Membrane) fuel cell is the most attractive for its clean productsExpand
Benchmark of proton exchange membrane fuel cell parameters extraction with metaheuristic optimization algorithms
TLDR
SFLA marginally outperforms ICA and FOA regarding the best SSE in both cases while it performs 20% and twofold better than other algorithms concerning the worst SSE, showing the precision and repeatability of this method. Expand
Nonlinear time-variant model of the PEM type fuel cell for automotive applications
TLDR
A time-variant state space model taking into account most of internal phenomena is built based on electrical and diffusion approaches, and reveals that membrane humidity has a considerable effect on the cell’s efficiency. Expand
A simplified PEM fuel cell model for building cogeneration applications
Abstract A simplified model of a polymer electrolyte membrane (PEM) fuel cell has been suggested for simulating packaged commercial fuel cell systems. PEM fuel cell systems are used in buildingExpand
Validation of a methodology for determining the PEM fuel cell complex impedance modelling parameters
TLDR
A new methodology for determining the complex impedance parameters for a Proton Exchange Membrane (PEM) Fuel Cell in order to have a general model for embedded diagnosis and validate the choice of the parameters is presented. Expand
Efficiency Improvement of PEM Fuel Cells via Humidity Control
PEM (Proton Exchange Membrane) fuel cell is a promising renewable energy source to a wide range of applications for its clean products and high power density. However, controlling its humidity is aExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 26 REFERENCES
Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations
Using semi-empirical equations for modeling a proton exchange membrane fuel cell is proposed for providing a tool for the design and analysis of fuel cell total systems. The focus of this study is toExpand
Parametric modelling of the performance of a 5-kW proton-exchange membrane fuel cell stack
Abstract A parametric model predicting the performance of a solid polymer electrolyte, proton-exchange membrane fuel cell has been developed using a combination of mechanistic and empirical modellingExpand
A practical model for evaluating the performance of proton exchange membrane fuel cells
Several models have been proposed in the literature to predict the performance of proton exchange membrane fuel cells (PEMFC). These models have different levels of complexity and can be dividedExpand
Electrical equivalent model of a proton exchange membrane fuel cell with experimental validation
In this paper, an equivalent electrical circuit of the pneumatics and fluidics in a fuel cell stack is developed. This model combines the simplicity of an electrical circuit and attempts to model theExpand
Model and experiment analysis of 1.2 kW PEMFC electrification
Abstract This paper developed a model of PEMFC by using MATLAB/Simulink in order to analyze the operation performance of a Proton Exchange Membrane Fuel Cell of 1.2 kW. Also, the experimental is setExpand
Analytical modeling of PEM fuel cell i–V curve
The performance of a fuel cell is characterized by its i–V curve. In this study, the performance of a bench scale fuel cell stack, run on hydrogen/air, is measured experimentally for different airExpand
Development and application of a generalised steady-state electrochemical model for a PEM fuel cell
Abstract Models have previously been developed and published to predict the steady-state performance of solid polymer electrolyte membrane fuel cells (PEMFC). In general, such models have beenExpand
Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell. II: Empirical model development
A parametric model predicting the performance of a solid polymer electrolyte, proton exchange membrane (PEM) fuel cell has been developed using a combination of mechanistic and empirical modelingExpand
A new approach to empirical electrical modelling of a fuel cell, an electrolyser or a regenerative fuel cell
In terms of fuel cell steady-state performance modelling, many electrical models have been developed either from a theoretical point of view or from an empirical point of view. The model described inExpand
Three order state space modeling of proton exchange membrane fuel cell with energy function definition
The fuel cell is a complex system which is the centre of a lot of multidisciplinary research activities since it involves intricate application of various fields of study. The operation of a fuelExpand
...
1
2
3
...