Comparison of Various Functionally Graded Femoral Prostheses by Finite Element Analysis

Abstract

This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.

DOI: 10.1155/2014/807621

Extracted Key Phrases

Cite this paper

@inproceedings{Oshkour2014ComparisonOV, title={Comparison of Various Functionally Graded Femoral Prostheses by Finite Element Analysis}, author={Azim Ataollahi Oshkour and Hossein Talebi and Seyed Farid Seyed Shirazi and Mehdi Bayat and Yat Huang Yau and Faris Tarlochan and Noor Azuan Abu Osman}, booktitle={TheScientificWorldJournal}, year={2014} }