• Corpus ID: 30122375

Comparative Cadmium Adsorption from Water by Nanochitosan and Chitosan

@inproceedings{Seyedi2013ComparativeCA,
  title={Comparative Cadmium Adsorption from Water by Nanochitosan and Chitosan},
  author={Seyed Masoud Seyedi and Bagher Anvaripour and Mohsen Motavassel and Naghi Jadidi},
  year={2013}
}
Chitosan and nanochitosan were used for the adsorption of cadmium from water. Nanochitosan was prepared from chitosan by using sodium tripolyphosphate. Cadmium removal was a pH dependent and the optimum adsorptions of chitosan and nanochitosan were found at pH solutions of 7.0 and 4.6 respectively. The maximum adsorption capacities for chitosan and nanochitosan adsorbents were 153 and 358 mg/g respectively. Experimental data were correlated better by the model of Langmuir than with Freundlich… 

Figures and Tables from this paper

Removal of cadmium from waters by adsorption using nanochitosan

This study is based on the removal of cadmium from water by adsorption onto nanochitosan in order to reduce the impact of cadmium toxicity to humans and animals. The adsorption of cadmium onto this

Comparison of Cadmium Adsorption from Water Using Same Source Chitosan and Nanochitosan: Is It Worthwhile to Go Nano?

Industrial effluents and stormwater runoff pose a significant threat to the environment and public health. Consequently, the water quality guidelines set strict limitations on the heavy metal content

Enhancement of Cr(VI) Ion Removal Using Nanochitosan Coated on Bituminous Activated Carbon

Bituminous activated carbon (AC) has been widely used as a sorbent for adsorption of non‐polar species, but its performance for removal of ionic species such as heavy metals has not been as

OPTIMIZING THE ESSENTIAL PARAMETERS IN PRODUCTION OF CHITOSAN NANOPARTICLES BY CALVO METHOD

The effect of chitosan concentration, sodium tripolyphosphate concentration, acetic acid concentration, volume ratio of chitosan solution to sodium tripolyphosphate solution, and NaCl concentration

Adsorption of Copper by Raw Pinecone

This work was carried out in order to study the possibility of using pinecones as inexpensive sorbent material for the removal of copper ions in solution. The experiment was carried out in the

Chitosan nanoparticles extracted from shrimp shells, application for removal of Fe(II) and Mn(II) from aqueous phases

ABSTRACT The present work aims to prepare an ecofriendly and effective material for adsorption of heavy metals, especially iron and manganese from polluted water. Chitosan nanoparticles were prepared

Chitosan Depolymerization and Nanochitosan Production Using a Single Physical Procedure

The many applications of the chitosan biopolymers in the areas of nanotechnology and nanomaterials have led to the need to develop novel techniques suitable for the production of nanochitosan. At

Cd (II) Removal from Aqueous Solutions by Adsorption on Henna and Henna with Chitosan Microparticles Using Response Surface Methodology

In this research, the capabilities of Henna and Henna with chitosan microparticles adsorbents were studied in order to remove the ion Cd (II). Response Surface Method (RSM) and Central Composite

References

SHOWING 1-10 OF 23 REFERENCES

The sorption of acid dye onto chitosan nanoparticles

Kinetics of cadmium uptake by chitosan-based crab shells.

Cadmium removal from aqueous solutions by chitin: kinetic and equilibrium studies.