• Corpus ID: 140075115

Characterization of the electrical properties of injection molded carbon nanocomposites

@inproceedings{Jorissen2018CharacterizationOT,
  title={Characterization of the electrical properties of injection molded carbon nanocomposites},
  author={J. Jorissen},
  year={2018}
}
Incorporating carbon nanomaterials such as carbon nanotubes into a polymer matrix not only enhances the mechanical properties of the composite, but also induces good electrical properties. This makes carbon nanocomposite interesting for potential electronic applications, such as electromagnetic interference shielding by means of creating housings for electronic devices. One potential option of producing carbon nanocomposites is via injection molding, which is widely used in the plastics… 

References

SHOWING 1-10 OF 44 REFERENCES

Electrical conductivity and mechanical properties of multiwalled carbon nanotube-reinforced polypropylene nanocomposites

In this paper, the electrical conductivity and mechanical properties such as elastic modulus of multiwalled carbon nanotubes (MWCNTs) reinforced polypropylene (PP) nanocomposites were investigated

Dielectric properties of carbon nanotubes/epoxy composites.

TLDR
It was found that the dielectric constant of nano-composites decreased gradually with the increasing of frequency (10(3)-10(6) Hz), and the DC conductivity results could interpret the peak value phenomenon by percolation threshold of MWCNTs.

Microstructure and Properties of Polypropylene/Carbon Nanotube Nanocomposites

In the last few years, great attention has been paid to the preparation of polypropylene (PP) nanocomposites using carbon nanotubes (CNTs) due to the tremendous enhancement of the mechanical,

The influence of injection molding parameters on electrical properties of PC/ABS‐MWCNT nanocomposites

The influence of injection molding parameters on electrical properties and morphology of PC/ABS-MWCNT nanocomposites is presented in this article. Investigation is based on the masterbatch of 5.0 wt

Structural characterization and electrical properties of carbon nanotubes/epoxy polymer composites

The purpose of this study is to identify the relationship between the electrical and structural characteristics of multiwalled carbon nanotubes dispersed into the polymer matrix of a resin. In a

Effects of injection molding conditions on the electrical properties of polycarbonate/carbon nanotube nanocomposites

Polycarbonate/Carbon nanotube (PC/CNT) nanocomposites containing various CNT contents (0–5 wt%) were prepared by injection molding. The effects of CNT contents, injection speed (V) and injection

A review on electrically conductive polypropylene and polyethylene

Conductive plastics are new generation functional materials with potential application in electronics, space and aviation industries. Polypropylene (PP) and polyethylene (PE) being most common,

EFFECT OF INJECTION MOLDING PARAMETERS ON THE ELECTRICAL CONDUCTIVITY OF POLYCARBONATE/CARBON NANOTUBE NANOCOMPOSITES

Polycarbonate (PC) was compounded with carbon nanotubes (CNT) using a co-rotating twin screw extruder followed by injection molding. Two 1.8 wt% PC/CNT nanocomposites produced from the direct

Dispersion and Performance Properties of Carbon Nanotubes (CNTs) Based Polymer Composites: A Review

Carbon nanotubes (CNTs) based polymer composites have variety of engineering applications (electromagnetic shielding, antistatic coatings, high-strength low-density corrosion-resistant components,