Characterization of the deformation state of magnesium by electrical resistance

  title={Characterization of the deformation state of magnesium by electrical resistance},
  author={Sebastian Meyer and Bj{\"o}rn Wiese and Norbert Hort and Regine Willumeit-R{\"o}mer},
  journal={Scripta Materialia},



Degradation Analysis of Thin Mg-xAg Wires Using X-ray Near-Field Holotomography

Magnesium–silver alloys are of high interest for the use as temporary bone implants due to their antibacterial properties in addition to biocompatibility and biodegradability. Thin wires in

On the Direct Extrusion of Magnesium Wires from Mg-Al-Zn Series Alloys

Wires of magnesium alloys possess a high potential, e.g., as filler materials, for joining applications but also for biodegradable applications, such as suture materials. While the typical process of

Metallographische Gefügeuntersuchungen von Magnesiumlegierungen / The Metallographical Examination of Magnesium Alloys

This article describes the microstructural examination of Magnesium and Magnesium alloys. A variation in the normal method of preparing and etching sections of Magnesium alloys is described and

Effect of pass strain and temperature on recrystallisation in magnesium alloy AZ31 after interrupted cold deformation

The isothermal annealing behaviour of magnesium (Mg) alloy AZ31 deformed by multi-directional forging (MDF) at ambient temperature is investigated at temperatures ranging from 443 to 518 K. With