Characterization of Porous Stainless Steel 430 for Low- and Intermediate-Temperature Solid Oxide Fuel Cell (SOFC) Substrates

@article{Rose2009CharacterizationOP,
  title={Characterization of Porous Stainless Steel 430 for Low- and Intermediate-Temperature Solid Oxide Fuel Cell (SOFC) Substrates},
  author={L. Rose and O. Kesler and C. Deĉes-Petit and T. Troczynski and R. Maric},
  journal={International Journal of Green Energy},
  year={2009},
  volume={6},
  pages={638 - 645}
}
One approach to lower the cost of solid oxide fuel cells (SOFCs) is to lower the operating temperatures below 1073 K to allow the use of robust and comparatively inexpensive stainless steels not only for interconnects but also for SOFC support structures. The metal supports must be sufficiently porous to facilitate gas flow toward the reactive sites in the electrodes. Gas flow and electrical conductivity must remain adequate during any oxidation that occurs during operation. In order to… Expand
...
1
2
...

References

SHOWING 1-10 OF 11 REFERENCES
Evaluation of porous 430L stainless steel for SOFC operation at intermediate temperatures
Water-based binder system for SOFC porous steel substrates
Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges
Electrochemical characterization of air plasma sprayed LSM/YSZ cathodes on metallic interconnects
  • ECS Transactions 7(1): 1107–1114.
  • 2007
Herstellung einer Metall/Keramik Verbundstruktur fuer Hochtemperaturbrennstoffzellen in mobilen Anwendungen
  • PhD thesis JUEL-4238, Research Center Juelich, Juelich, Germany.
  • 2006
Recent Developments in Anode Supported Thin Film SOFC at Research Centre Jülich
...
1
2
...