Characterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System—Microstructures and Mechanical Properties

@inproceedings{Matysik2015CharacterizationOL,
  title={Characterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System—Microstructures and Mechanical Properties},
  author={Piotr Matysik and Stanisław J{\'o}źwiak and Tomasz Czujko},
  booktitle={Materials},
  year={2015}
}
Fe-Al intermetallic alloys with aluminum content over 60 at% are in the area of the phase equilibrium diagram that is considerably less investigated in comparison to the high-symmetry Fe₃Al and FeAl phases. Ambiguous crystallographic information and incoherent data referring to the phase equilibrium diagrams placed in a high-aluminum range have caused confusions and misinformation. Nowadays unequivocal material properties description of FeAl₂, Fe₂Al₅ and FeAl₃ intermetallic alloys is still… CONTINUE READING

References

Publications referenced by this paper.
Showing 1-10 of 62 references

Indentation microcracking and toughness of newly discovered ternary intermetallic phases in the Ni-Si-Mg system

  • Y. K. Song, R. A. Varin
  • Intermetallics 1998,
  • 1998
Highly Influential
9 Excerpts

Indentation fracture of WC-Co cermets

  • D. K. Shetty, I. G. Wright, P. N. Mincer, A. M. Clauer
  • J. Mater. Sci. 1985,
  • 1985
Highly Influential
7 Excerpts

Formation enthalpy of intermetallic phases from Al-Fe system measured with solution calorimetric method

  • W. Gąsior, A. Dębski, Z. Moser
  • Intermetallics 2012,
  • 2012
Highly Influential
5 Excerpts

Quantitative determination of material hardness

  • Z. Pluta, T. Hryniewicz
  • J. Quantum Inf. Sci. 2011,
  • 2011
Highly Influential
4 Excerpts

Variables affecting growth and morphology of the intermetallic layer (Fe2Al5)

  • M. Yousaf, J. Iqbal, M. Ajmal
  • Mater. Characteriation
  • 2011
Highly Influential
5 Excerpts

Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys

  • J. Wang, J. Xing, Z. Qiu, X. Zhi, L. Cao
  • J. Alloys Compd
  • 2009
Highly Influential
5 Excerpts

Fracture toughness enhancement for metal-reinforced alumina

  • E. Rocha-Rangel, E. Refugio-Garcíab, J. G. Miranda-Hernández, E. Terrés-Rojas
  • J. Ceram. Process. Res. 2009,
  • 2009
Highly Influential
10 Excerpts

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

  • R. Qiu, C. Iwamoto, S. Satonaka
  • J. Mater. Process. Technol
  • 2009
Highly Influential
5 Excerpts

The heats of formation in the systems titanium-aluminium and titanium-iron

  • O. Kubaschewski, W. A. Dench
  • Acta Metall. 1955,
  • 1955
Highly Influential
4 Excerpts

Similar Papers

Loading similar papers…