Characterization of Chemical Composition and Microstructure of Natural Iron Ore from Muko Deposits

  title={Characterization of Chemical Composition and Microstructure of Natural Iron Ore from Muko Deposits},
  author={Abraham Judah Bumalirivu Muwanguzi and Andrey Vladimirovich Karasev and Joseph K. Byaruhanga and P{\"a}r G{\"o}ran J{\"o}nsson},
  journal={International Scholarly Research Notices},
The study aimed at investigating the chemical composition and microstructure of raw iron ore from the deposits in Muko area (south-western Uganda). The quality of this iron ore was evaluated to establish its suitability to serve as a raw material for iron production. Samples were taken from the six hills of Muko ore deposits and tests carried out to establish their composition and properties. X-ray diffraction and scanning electron microscopy were employed in the investigation and chemical… 

Figures and Tables from this paper

Chemical, physical, thermal, textural and mineralogical studies of natural iron ores from Odisha and Chhattisgarh regions, India

The chemical, physical, thermal and texture properties of iron ores from different regions of Odisha and Chhattisgarh regions, India, have been investigated to understand the compositional variations

Geochemistry and Economic Potential of Jaruwa Iron Ores, NW-Nigeria.

: Iron ores are known to occur in many parts of Nigeria especially within the metasedimentary / metavolcanic rocks prominent in the western half of the country where they occur mostly as Banded Iron

Comparative study on mineralogy and beneficiation potential of western Crete iron ores

ABSTRACT This study aims to investigate and compare the mineralogical characteristics of the western Crete iron ores in the Kakopetros and Arolithi areas. In addition, conventional beneficiation

Chemical and mineralogical characterization of Gidan Jaja iron ore, Zamfara State, Nigeria

The chemical and mineralogical characteristics of Gidan Jaja iron ore located in Zurmi Local Governmental Area of Zamfara State was carried out using X-ray Fluorescence (XRF) spectrometer, X-ray

Genesis of langrial iron ore of hazara area, khyber pakhtunkhaw, parkistan

The overall results show that Langrial Iron ore is a low-grade iron ore and can be upgraded up to 62% by applying modern mining techniques to fulfill steel requirements of the country.

Evaluation of Mesh of Liberation of Zard Koh and Kulli Koh Iron Ores of Pakistan

Liberation size plays a significant role to select a correct and successful concentration method for natural iron ores. This paper aims to evaluate the liberation size of two newly discovered iron

A Short Review of the Effect of Iron Ore Selection on Mineral Phases of Iron Ore Sinter

The sintering process is a thermal agglomeration process, and it is accompanied by chemical reactions. In this process, a mixture of iron ore fines, flux, and coal particles is heated to about 1300

Determination of grindability characteristics of Duguri (Nigeria) galena towards effective beneficiation process

The grindabiliy of Duguri (Nigeria) galena was determined using Bond work index method. The investigation was carried out using sourced galena (Lead ore) as test ore from Duguri village in Alkaleri

Geochemical Fingerprint and Iron Ore Potential of the Siliceous Itabirite from Palaeoproterozoic Nyong Series, Zambi Area, Southwestern Cameroon

The study area forms part of an emerging iron ore province of southern Cameroon. Geochemistry analyses reveal that the siliceous itabirite has a very simple chemical composition, with Fe2O3 and SiO2



Iron ores, fluxes and tuyere injected coals used in the blast furnace

Abstract Iron ores, fluxes and tuyere injected coals used as burden materials in the blast furnace have been characterised by chemical and granulometric analysis, moisture, density and porosity,

Upgrading Nigerian iron ores

A number of Nigerian iron ore deposits have been upgraded to the specifications of concentrates for the blast furnace and the direct reduction iron- and steel-making plants. Depending on the

The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses

1. Introduction to the Iron Oxides. 2. Crystal Structure. 3. Cation Substitution. 4. Crystal Morphology and Size. 5. Surface Area and Porosity. 6. Electronic, Electrical and Magnetic Properties. 7.

Production of Reduced Iron Powder Using Ultra-Fine Iron Concentrate

The using of the iron to extract reduced iron with TFe≥ 69.5% Al2O3+SiO2<0.3% was studied. Preparation of reduced iron powder in this experimental research can produce ultra-pure magnetite

Iron Oxides in the Laboratory: Preparation and Characterization

Introduction The Iron Oxides and Hydroxides General Preparative Techniques Methods of Characterization Methods of Synthesis Goethite Lepidocrocite Feroxyhyte Ferrihydrite Akaganeite Hematite

Plan B 4.0: Mobilizing to Save Civilization. By Lester R. Brown. W.W. Norton and Co., New York, NY. 368 p., paper, $16.95, ISBN 978-0-393-33719-8.

  • C. Francis
  • Economics
    Renewable Agriculture and Food Systems
  • 2010
With an incredible level of energy and unwavering focus over the horizon, Lester Brown never ceases to amaze his readers with yet another annual greenprint for the future. Plan B 4.0: Mobilizing to