COMPARISON OF CLEARANCE VARIATION USING SELECTIVE ASSEMBLY AND METAHEURISTIC APPROACH

@inproceedings{Asha2017COMPARISONOC,
  title={COMPARISON OF CLEARANCE VARIATION USING SELECTIVE ASSEMBLY AND METAHEURISTIC APPROACH},
  author={A. Asha and J. Rajesh Babu},
  year={2017}
}
Selective assembly is an approach for reducing the overall variation and thus improving the quality of an assembled product. In this process, components of a mating pair are measured and grouped into several classes (bins) as they are manufactured. The final product is assembled by selecting the components of each pair from appropriate bins to meet the required specifications as closely as possible. This approach is often less costly than a tolerance design using tighter specifications on… Expand

Figures and Tables from this paper

A New Grouping Method in Selective Assembly for Minimizing Clearance Variation Using TLBO,
Allowable variation from the nominal dimension that’s tolerance of a component plays a vital role in selecting manufacturing process and functioning of the product while mating with other subExpand
Optimization of Selective Assembly for Shafts and Holes Based on Relative Entropy and Dynamic Programming
TLDR
An optimization method of selective assembly for shafts and holes based on relative entropy and dynamic programming is proposed, and optimal combinations are selected, which provide new insights into selective assembly optimization and lay the foundation for selective assembly of multi-batch precision parts. Expand
Analysis of uncertainty relation of pin-shaft fitting in mechanical system with clearance
Pin-shaft fit is one of the most basic assembly structures for mechanical products, and the fit clearance plays a decisive role in the performance, safety and effective operation of the product.Expand

References

SHOWING 1-10 OF 16 REFERENCES
A New Method in Selective Assembly to Minimize Clearance Variation for a Radial Assembly Using Genetic Algorithm
Selective assembly is the method of obtaining high-precision assemblies from relatively low-precision components. A relatively smaller clearance variation is achieved than in interchangeableExpand
SELECTIVE ASSEMBLY TO MINIMIZE CLEARANCE VARIATION IN COMPLEX ASSEMBLIES USING FUZZY EVOLUTIONARY PROGRAMMING METHOD
Selective assembly is an economic method to obtain perfect precision assemblies by using the components manufactured with wide tolerance specifications. The mating component’s tolerances are dividedExpand
Optimization of clearance variation in selective assembly for components with multiple characteristics
Quality is an important aspect of any manufacturing process. Only high quality products can survive in the market. The consumer not only wants quality, precision and trouble-free products, but alsoExpand
A new method in selective assembly for components with skewed distributions
A product consists of two or more components assembled together is an assembly. The quality of the product depends upon the quality of the assembly. The contributing quality characteristics of theExpand
A new algorithm for minimising the surplus parts in selective assembly
Abstract Selective assembly is a normally accepted method for producing high precision assembly from relatively low precision components. The accuracy of selective assembly is mainly based on theExpand
SIMPLIFICATION OF SELECTIVE ASSEMBLY
Selective assembly is used whenever the tolerances which have to be allowed for the components are so large that the natural build up with random assembly will not satisfy functional requirement's.Expand
An approach to minimizing surplus parts in selective assembly with genetic algorithm
This article proposes an approach to minimize the surplus parts in selective assembly with genetic algorithm. A grouping method is proposed considering the different tolerance ranges of parts, andExpand
Optimal Binning Strategies Under Squared Error Loss in Selective Assembly with a Tolerance Constraint
Selective assembly is an effective approach for improving the quality of a product assembled from two types of components when the quality characteristic is the clearance between the matingExpand
SELECTIVE ASSEMBLY — ITS ANALYSIS AND APPLICATIONS
SUMMARY The major problem in the operation of a selective assembly plan is “mismatching”, where the number of components in one category does not match the numbers in the corresponding category ofExpand
An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems
Article history: Received 10 March 2010 Received in revised form June, 23, 2011 Accepted 24 June 2011 Available online 24 June 2011 Job Shop Scheduling Problem (JSSP) and Flow Shop Scheduling ProblemExpand
...
1
2
...