CAD-based simulations and design of experiments for determining thrust force in drilling operations

  title={CAD-based simulations and design of experiments for determining thrust force in drilling operations},
  author={Panagiotis Kyratsis and Nikolaos Bilalis and Aristomenis Antoniadis},
  journal={Computer-Aided Design},
Drilling thrust force calculations require a large amount of experimental work, which can be greatly reduced, since an extensively validated CAD-based approach, using the DRILL3D software application, has become available. DRILL3D calculates the thrust force of both the cutting areas of the tool (main edges and chisel edge) simultaneously, which means that every simulation can substitute two separate lab experiments. Nevertheless, as the number of parameters involved is increasing, the amount… CONTINUE READING
5 Citations
39 References
Similar Papers


Publications referenced by this paper.
Showing 1-10 of 39 references

Artificial neural network modeling of the drilling process of self-lubricated aluminium/alumina/graphite hybrid composites synthesized by powder metallurgy technique

  • MT Hayajneh, AM Hassan, AT. Mayyas
  • Journal of Alloys and Compounds 2009;478:559–65
  • 2011

Simulation of the drilling manufacturing process using a CAD/CAM system

  • P. Kyratsis
  • Ph.D. thesis. Technical University of Crete;
  • 2011
1 Excerpt

Application of computing techniques in machining performance prediction and optimization: a literatura review

  • ChandrasekaranM, MuralidharM, KC Murali, US Dixit
  • International Journal of Advanced Manufacturing…
  • 2010

Phenomenologicalmodel for drilling operation

  • S Laporte, JY K’Nevez
  • International Journal of Advanced Manufacturing…
  • 2009

Phenomenologicalmodel for drilling operation. International Journal of Advanced Manufacturing Technology 2009;40:1–11

  • S Laporte, JY K’Nevez, CahucO
  • 2009

Surface roughness optimisation in a drilling operation using the Taguchi design method

  • JZ Zhang, JC Chen
  • Materials and Manufacturing Processes
  • 2009

A study of high - performance plane rake faced twist drills . Part II : predictive force models

  • J Wang, QA Zhang
  • International Journal of Machine Tools and…
  • 2008

Advanced machining processes of metallic materials

  • W. Grzesik
  • 2008
1 Excerpt

Analysis of the high performance drilling process: influence of shape and profile of cutting edge of twist drills

  • W. Koehler
  • Journal of Manufacturing Science and Engineering
  • 2008

Correlation between drill geometry and mechanical forces in MQL conditions

  • C Claudin, G Poulachon, M. Lambertin
  • Machining Science & Technology
  • 2008

Similar Papers

Loading similar papers…