C37.110 guide for the application of current transformers used for protective relaying purposes

@article{Conroy1999C37110GF,
  title={C37.110 guide for the application of current transformers used for protective relaying purposes},
  author={M. W. Conroy and B. Nelson and Bo{\vz}ica Bo{\vz}oki and J. W. Chadwick and P. R. Drum and L. L. Dovrak and Irwin Hasenwinkle and J. D. Huddleston and William C. Kotheimer and John R. Linders and Michael J. McDonald and George Moskos and Gerard Parr and Rita M. Ryan and E. T. Sage and D. W. Smaha and Keith Stephen and James E Stephens and J. T. Uchiyama and S. E. Zocholl},
  journal={IEEE Transactions on Power Delivery},
  year={1999},
  volume={14},
  pages={94-97}
}
Relay engineers have had to rely on many sources to compile information on current transformer application. Typically, they have drawn on relay application and transformer textbooks, manufacturer publications, and standards. Recognizing the need for a comprehensive one source document, the power system relaying committee has produced the C37.110-1996 guide for the application of current transformers used for protective relay purposes. 
Guidelines for current transformers selection for protection systems
  • L. Kojovic
  • Physics, Business
    2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262)
  • 2001
If current transformer (CT) characteristics are not properly selected for fault conditions, saturation will occur and relays can misoperate. To help protection engineers select the appropriate CT,
Comparative Performance Characteristics of Current Transformers and Rogowski Coils used for Protective Relaying Purposes
  • L. Kojovic
  • Physics
    2007 IEEE Power Engineering Society General Meeting
  • 2007
This paper compares performance characteristics of conventional current transformers and Rogowski coils used for protective relaying purposes. Rogowski coils have low-power outputs. They are linear
Magnetization and Primary Injection Test of Current Transformer for Protective Relaying
Emphasis is placed on the ability of current transformers to provide accurate operating current at normal system operation and other system disturbance to protective relay systems in high voltage
Impact of CT errors on protective relays – case studies and analyses
  • R. Hunt
  • Engineering
    Conference Record of 2010 Annual Pulp & Paper Industry Technical Conference
  • 2009
Current transformers (CTs) are the basic interconnection between the power system and protective relays. One of the practical concerns for the protection engineer is the actual ability of a CT to
Current Transformer Adequacy
TLDR
A windows application is developed to check whether CT selected for particular application having certain burden is adequate or not and if in case the selected CT is not adequate then the application will suggest new CT design to avoid saturation.
Considerations for using high-impedance or low-impedance relays for bus differential protection
Two drastically different types of differential relays, one with a single set of very high-impedance inputs and another with multiple sets of low-impedance inputs, are available for bus differential
Dimensioning CTs for small generator differential protection
  • R. Hunt
  • Engineering, Physics
    2010 63rd Annual Conference for Protective Relay Engineers
  • 2010
Small generators are commonly installed to provide backup or standby power for critical facilities such as hospitals, data centers, communications centers, and the like. These generators are
Efficient proposed solutions for current transformers saturation effects on overcurrent relays operations in distribution systems
  • N. H. Al-Abbas
  • Engineering
    2009 44th International Universities Power Engineering Conference (UPEC)
  • 2009
Improper selections of current transformers will result in CT's saturation during fault conditions which can affect protection relays operations. With the absence of clear and practical guidelines
Bus protection for impedance grounded systems
  • R. Hunt
  • Computer Science
    2009 62nd Annual Conference for Protective Relay Engineers
  • 2009
TLDR
Adding bus protection to distribution buses, especially in enclosed switchgear, is not as simple as picking some relays and calculating settings, and the real challenge has to do with CT requirements and CT performance.
Selection of current transformers and wire sizing in substations
  • S. Ganesan
  • Engineering
    59th Annual Conference for Protective Relay Engineers, 2006.
  • 2006
While retrofitting protections and meters in substations, the older equipment get replaced with newer ones with the rest of the installation such as current transformer (CT) and lead remaining
...
...