• Corpus ID: 29980879

Bulk Properties of Powders

@inproceedings{Lee2007BulkPO,
  title={Bulk Properties of Powders},
  author={P. W. Lee and R. M. German and B. Lynn Ferguson},
  year={2007}
}
THE P/M INDUSTRY has grown considerably in the past decade. As a result of this growth, more critical components in the automotive, aircraft, tooling, and industrial equipment industries are being considered for manufacture using this technology: This is placing increasingly stringent quality requirements on the final P/M part. Variations in part density, mechanical properties including strength, wear, and fatigue life, as well as in aesthetic appearance and dimensional accuracy are no longer… 
Powder Characterization and Testing
Influence of Powder Deposition on Powder Bed and Specimen Properties
TLDR
An anisotropic effect of the mechanical properties resulting from different building directions has been detected which can be explained by varying amounts of solid contact paths through the powder bed depending on powder application direction, complementing the advantages of additive manufacturing.
A Comprehensive Approach to Powder Feedstock Characterization for Powder Bed Fusion Additive Manufacturing: A Case Study on AlSi7Mg
TLDR
By manipulating particle distribution, size and morphology, challenging powder feedstock such as Al, can be optimized for powder bed fusion additive manufacturing, according to this result.
Traditional and Advanced Flow Characterization Techniques: A Platform Review for Development of Solid Dosage Form
Preformulation studies like storage, transfer, fluidisation, and compaction, are subject to the excellent flowability of the powder. It is often required for proper operational management and
Effect of mixing time on the bed density, and microstructure of selective laser sintered (sls) aluminium powders
The effect of mixing time on the homogeneity of aluminium powder blends and its SLS processed density and microstructure has been explored with a view to providing a basis for quality control. The
Milling Duration Influence on Strontium Hexaferrite Technological Characteristics
Fine powders of strontium hexaferrite are widely used in powder metallurgy for the production of permanent magnets resistant to atmospheric oxygen and high working temperatures. Obtaining powders
...
...

References

SHOWING 1-10 OF 31 REFERENCES
Correlation between the apparent density of iron powder and its flow rate and pressing behavior
The technical iron powders produced by the Brovarsk, Dneprovsk, Novo-Tul'sk, and Sulinsk plants constitute a substantial proportion of the whole metal-powder output in the Soviet Union. The
SOME ASPECTS OF THE PROPERTY OF ANGLE OF REPOSE OF POWDERS
  • D. Train
  • Materials Science
    The Journal of pharmacy and pharmacology
  • 1958
TLDR
Four methods of determining the angle of repose of free flowing powders have been critically compared using graded samples of glass balls, lead shot and silver sand and it was found that results for spheres could be correlated on one graph, irrespective of type of material.
Powder metallurgy science
STORAGE AND FLOW OF SOLIDS :(REV. 1980. )
...
...