Bubble formation regimes in forced co-axial air-water jets

  title={Bubble formation regimes in forced co-axial air-water jets},
  author={J. Ruiz-Rus and R. Bolanos-Jim'enez and Alejandro Sevilla and C. Mart'inez-Baz'an},
  journal={International Journal of Multiphase Flow},
5 Citations
Influence Mechanism of Gas–Containing Characteristics of Annulus Submerged Jets on Sealing Degree of Mixing Zone
The introduction of air into a submerged annular jet will result in dispersion of the jet, which will affect the degree of enclosure of the gas–water mixing zone in the annular jet nozzle, and then
Dripping, jetting and tip streaming.
This work presents the theoretical model used to study interfacial flows arising in droplet-based microfluidics, paying attention to three elements commonly present in applications: viscoelasticity, electric fields and surfactants, and considers the relatively scarce theoretical studies on the emergence and stability of tip streaming flows.


Transition from bubbling to jetting in a coaxial air–water jet
In this Brief Communication we study experimentally the flow regimes that appear in coaxial air–water jets discharging into a stagnant air atmosphere and we propose a simple explanation for their
Bubble formation in a coflowing air–water stream
In this work, we present a detailed experimental study of the periodic formation of bubbles in an air–water coflowing stream, as well as a simple model to describe the process. The frequency of
Bubbling in a co-flow at high Reynolds numbers
The physical mechanisms underlying bubble formation from a needle in a co-flowing liquid environment at high Reynolds numbers are studied in detail with the aid of experiments and boundary-integral
Bubble formation in a coflow configuration in normal and reduced gravity
A study of bubble generation for constant gas-flux condition by single-nozzle injection in a coflowing liquid is reported. Focusing on single-bubble generation in the dynamic and bubbly flow regime,
Bubble pinch-off in a rotating flow.
It is argued that the Bernoulli pressure reduction caused by this air flow can become sufficient to overcome the centrifugal forces and cause the final pinch-off.
Bubble Formation at a Submerged Orifice in High-Speed Horizontal Oscillation
Reducing the cell size of aluminum foams is always a hot and difficult topic in the fabrication of aluminum foams by gas injection route. There lacks theoretical guidance for the bubble size